Used Pair of Kenwood 3 way 6x8 - $60 SHIPPED
http://www.crutchfield.com/cgi-bin/S-Aepy3RUeMTj/ProdView.asp?s=0&c=10&g=52200&I=113KFC6889&o=m&a=0&cc=01&avf=N

Used Pair of MTX 2 way 5x7 w/ grills - $60 SHIPPED
http://www.sounddomain.com/sku/MTX5732

New in package Rockford Distribution block. (1) 4ga in -> (4) 8ga out - $12 SHIPPED
http://www.sounddomain.com/sku/ROCCPD1448

They speakers are in great condition. the MTX's were used for 5 months and the Kenwoods 1 month.

I only accept MO's and Checks. Im open for trades.

Bump

any offers?????

I need new subs so i need to get rid of this stuff. Make any offer. anything reasonable will not be refused

ive been searching a distribion block and i still dont really know what it does and where you hook it up. i might buy it if you describe all that to me, so id know what to do with it if i bought it. :rolleyes: thanks

say you run a 4ga wire from your battery to the back of your X and you have 2 or more amps, this just spilts the power wire up nicely and neatly to your amps.

ok well thanks but i only have one amp. sorry, if ui could have used it for 12 bucks id of bought it.

bumpity bump

bumpity bump bump

Browsing around EBAY and came up upon this
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2430555391&category=42611

Good find, it will fit 95 - 01 Explorers. I was looking at them before I made mine, but they were too expensive.

hrm, i'm gonna have to keep my eye on that.

It's got NOS.

Doug's a ricer. ;)

Man... that sellar sure has a lot of junk for sale... Ooh and there is a gray overhead console in there also for 8$ :D to whomever cares

How strong is that that thing? ANyone know? I will build my own like Brians if this thing is going to dent to easy, Just looks thin to me
Gary

They are actually pretty tuff... one of the guys on the Ranger board had one on his Edge and I saw it take some pretty good hits. I think the stength comes partialy the way it is formed. I know mine could take a bigger hit, but if you are hitting stuff that hard, I'd be worried about more than the skidplate.

cool thanks again Brian, i'll keep an eye on that if everyone else here doesnt out bid me
Gary

It's mine! you can't have it! :D

This outta be funny... there's going to be an EF bidding war on this thing

$31 plus $20 shippinh=$51. for that price, we can buy some thicker diamond plate and make a really tough one. i bet u it is going to get super outragious.

Exactly what the title says.... Its the Stull Billit grille. I payed 135$ for it new. Just shoot out any offers, i just need money.

70$ OBO

why are you selling it? I would like to see pics too

Im changing to a white grilleshell. Its it perfect shape. I dont have a digi camera so i can see what i can do with the pics though.

This isn't it but this is what it looks like to give you an idea
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6763&item=2432515581

Does Stull make a Billet grille for the bumper to match yours?

i think they discontinued them i think but they make one that looks like it will fit......
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33645&item=2432975354

im up for trades also

I might trade you my brand new SS speed grill if you are interested
I would need to see some pics of it and the actual shape. Here is my grill: (The pics are horrible on this digi cam)
http://images.cardomain.com/member_img_a/235000-235999/235343_67_full.jpg

Here is how it looks with a white grill shell (thanks Allie)
http://images.cardomain.com/member_img_b/270000-270999/270720_42_full.jpg

Originally posted by boominXplorer
i think they discontinued them i think but they make one that looks like it will fit......
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33645&item=2432975354

That link above is for the Ranger. Would that fit the '97 stock bumper? Reason I'm asking is that I want a set if I ever gonna get one. Thanks.

Brandon... Im not interested in another type of grille other than stock right now. I will have pics up hopefully by monday. My truck is in the garage at my parents house because it is storming very bad (Damn Isabell) so i'll see what i can do with pics.

X-factor....This matches my grille. It expensive though i think.

http://www.nopionline.com/index.cfm?fuseaction=dsppartdetail&vmakeid=125&vmodelid=120&vcatyear=1995&vnopinum=835%2B0486&vTitle=1995%20FORD%20Explorer%20Body%20Components%20Body%20Part%20-%20Grille&vaffid=0

Is it the xlt crome one? I have a white shell and would maybe trade for a crome. Only prob is it's on the truck.

i cut my stock one so it is not good without a this grille. Anyone is the VA area i will trade you my whole chrome grille w/ the billet for your painted one + 20$

I have a pair of black tow hooks for sale. They are not used. Come with bolts and nuts. They are the same ones adam used in the pic. http://www.explorerforum.com/forums/showthread.php?s=&threadid=30623&highlight=tow+hook

10$ + ship OBO

Chances are shipping will be too high on these for it to be worthwhile to sell em. I can get 2 pair new for (including tax) $19 at AutoZone. But if you wanted, I'd give ya $15 shipped ;)

Well i just got a PM for 15$ so i have to wait till he gets back to me

No worries.. he can have em ;)

I am selling a CDplayer and changer for a friend....

A JVC CD player KD-SH77
- missing metal sleave and remote
- it does has the trim ring and wirering harness

looks like this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3052048459&category=39759

JVC 12 dick changer CH-X1100
-has wires to hook up to any JVC deck or screen to hook up to any stock radio.

Looks like this:
http://search.ebay.com/search/search.dll?cgiurl=http%3A%2F%2Fcgi.ebay.com%2Fws%2F&krd=1&from=R8&MfcISAPICommand=GetResult&ht=1&SortProperty=MetaEndSort&query=kd-sh77

Just shoot out any reasonable offers, all i can do is say no! :)

CD Player
http://www.twoguyzsellingcars.com/cust/john/jvc/front.jpg

Changer
http://i20.ebayimg.com/03/i/00/93/b3/33_1.JPG

TTT

$75

if your talking about both... no :(

Some older stuff. But does it include the cable to connect the changer to the tuner?

I am going to do some measuring today and let you know.

Thanks

It includes everythign to hook it up. I also have an extr kit i bought with the changer that comes with a screen for the changer if you use it on a stokcsystemfor any reason. This stuff is no more than 2 years old. CD player has 3 pre-outs with inputs for a DVD player.

You do not have the remote for the player?

Its coming up at $40 at JVC is it broken or lost?

Thanks

Also are you sure the adapter will let you hook it up to a stock system? I am thinking about adding the changer to my 98 Taurus that i use for work

Thanks

its lost. The changer hooks up by an FM modulader. It has a little screen.

I have a rockford 801x in almost brand new condition. I have tossed the manuals and box away though.
specs.
-4ch
-4x100 @ 4ohms
-4x200 @ 2ohms
-2x400 @ 4ohms bridged
-crossovers
-needs external fuse
all the other small specs can be found on rockfords website.
I payed 475$ for this and im looking for a quick sale so all i want is 300$ INCLUDING SHIPPING!

remember this is a 2003 model.

BUMP

OK as some of you may know my truck is out of commission. This weekend im picking up a 2000 mounty V8 AWD. So Whatever wont fit on it is for sale...... all prices include shipping in lower 48

Clear Corners (not yellow at all) 30$ Sold.....
B&M Electronic shift kit 35$
Dual gauge pod w/oil & volts 80$
Spare Tire winch 30$
Rockford Frosgate 2 awg wiring w/ANL fude block and 3 FT ground 50$


NOTE: I may end up totally parting it out but am still undicided.
NOTE 2: I AM NOT SELLING THE ROLL PAN! I am actually going to try to make a mold so everyone with a 91-97 can get one.

What happened to the truck?

My rear end had been going out and i was bringing it home to put in the garage to replace and it decided to lock up killing my transfer case and my tranny at the same time. Lucking thing was i was right down the street from my house so me and a friend pushed it to my house.

Pic of the gauge pod? robb@tabguys.com

http://www.explorerforum.com/data/2/12558gauges.JPG

Boomin, I might just be in Fredricksburg this weekend, if I am I would like to meet and maybe get those clears. Ill PM you if I go.

Wheels are for sale also. Im interested in a trade too. Make an offer excluding shipping

Here is a nice dirty pic of them
http://www.explorerforum.com/data/2/12558rim_and_rotor.JPG

Originally posted by boominXplorer
My rear end had been going out and i was bringing it home to put in the garage to replace and it decided to lock up killing my transfer case and my tranny at the same time. Lucking thing was i was right down the street from my house so me and a friend pushed it to my house.
Is that all that went out? Hell, I coulda hooked you up with a rear diff and tcase, and I am only 45 minutes away.

edit: oh, not the type of pod I was looking for, sorry.

Originally posted by Robb
Is that all that went out? Hell, I coulda hooked you up with a rear diff and tcase, and I am only 45 minutes away.

edit: oh, not the type of pod I was looking for, sorry.

Still have that stuff? You have just the diff or the whole rear axel? I need a front diff too. If you want you can get on AOL and IM me at LowXploHer

Will you trade sideskirts with me ?? Ill pay for shipping ... for both. If its negotiable e-mail me:

NovaKnight@hotmail.com

http://www.mustangmods.com/data/1980/blem_5.jpg

Corners are spoken for at the moment........

Pic of the new ride...
http://images.cardomain.com/member_images/5/web/509000-509999/509099_22_full.jpg

Also I will take stuff for trade if its for my new truck (Swaybars, Reverse gauges etc.)

Front or back bumper?
Front EE airdam is going on it and my rollpan will be used for a mold that i will hopefully be able to make rollpans for the masses

ur selling an amp and all the wires and stuff what kind of amp and how much wats cause i have been lookin for an amp for a while i dont know where to get the shipping # to see how much it would be but let me know thanks


matt

no amp for sale yet. Just my 2 awg wirering

that sucks man, your truck was an insperation to me man...
if you start parting it out, i call dibs on the hatch. :) i'd be intrested in getting that off you....all shaved already FREAKING SWEET..please let me know what you would want for it....if its reasonable maybe i can get that off ya :)

Bump

Pics being sent in 5 mins bud ...

Interested in selling the whole truck??

Originally posted by Fhantazm
Interested in selling the whole truck??
as is or stock? Give me an offer. You can PM it if you would like

is that trunk protector thing sold? my wife hates when i carry car parts in the trunk cause it gets carpet nasty. LOL


if it is sold where can i get one.

is the drivers side rear door for sale?

havent decided to part out yet (awaiting ROBB's PM and also Fhantazm's) after those replys i will know whats up for grabs.

Boomin. The guy who really wanted me to try and get this from you has stated his wife said no. So i guess its going to be your parts truck. Its a shame tho, really nice truck.

OK ITS GETTING PARTED OUT.............

Parts that are gone or being used....
-Hood
-Wheels
-Brakes

It has willow green interior with a split 60/40 seat up front.

Just state what you want and make an offer

Originally posted by 1995whitestang
is that trunk protector thing sold? my wife hates when i carry car parts in the trunk cause it gets carpet nasty. LOL


if it is sold where can i get one.

what about this piece. if it is sold where can i find it?

do you think you could give me a price on that door

Originally posted by 1995whitestang
what about this piece. if it is sold where can i find it?

I had it but my mom is using it in her Ex now. Im not sure where she got it (maybe from ford)

Originally posted by Billy177
do you think you could give me a price on that door

It would be without the interior door panel and speaker. Also would you be able to pick it up because im not to fond of shipping large items

TRUCK IS BEING SOLD HOLE AS OF NOW

I just got an offer I couldn't refuse. All the aftermarket parts are still for sale though.

how did your tranny and transfercase go at the same time i would think one would be weaker than the other. wouldent it be the same as slamming on the ebrake

whats dubbed as "after market"?

Originally posted by Billy177
how did your tranny and transfercase go at the same time i would think one would be weaker than the other. wouldent it be the same as slamming on the ebrake

My tranny has been messed up since day 1 of rebuild. I have taken it back for warrenty work probibly 14 times now. The problem with it is there is no O/D, hard shifts and i can be going 90 mph, let off the gas and it goes to idle. It does that at all speads. How the transfercase broke was kinda my problem because the rear end has been clunking and i was on this straity stretch and i was floored and the rear diff locked up which broke something in my t-case. I now have no power to my front or rear wheels (either t-case or tranny). Im just surprided a U-joint didn't break

Originally posted by EliteConcept
whats dubbed as "after market"?
First post stuff, Wheels and maybe that hatch trade for you.

cool, as i said i'm very intrested in the hatch and rims

OK my EE airdam for 95-98 is also up for grabs now. Make an offer

i know this is not aftermarket but are your skidplates for sale

transfercase
gastank

Originally posted by Billy177
i know this is not aftermarket but are your skidplates for sale

transfercase
gastank
Nope I dont feel like taking them off and the new owner might want them

Originally posted by boominXplorer
OK my EE airdam for 95-98 is also up for grabs now. Make an offer

Ill take it for 250 Shipped ...

Originally posted by SteedaExplorer
Ill take it for 250 Shipped ...

Deal.... can you send a MO or a check?

airdam is sold

Is everything included for the shift kit? This won't harm you tranny will it?

Did your old one have leather seats? If they did, you're going down! I'll find out where you live!!!! ;)

Originally posted by IAmTodd
Is everything included for the shift kit? This won't harm you tranny will it?

Did your old one have leather seats? If they did, you're going down! I'll find out where you live!!!! ;)
Only thing im missing from the kit is one of those pink clips. Its in the garage somewhere but if i can't fint it i'll get one at radioshack or somethin for the buyer.

It wont harm your tranny at all. Actually I think its sopposed to help your torque coneverter last longer or something. Seach might help

Nope... cloth 60/40 up front

TTT

New stuff.......

Silverstars 9007 NIB. Fits all explorers and mountaineers 95-01 (not sure about 91-94 but someone will chime in) asking 35$ shipped
http://www.explorerforum.com/data/2/12558silverstars.JPG

Stock speakers from my Mountaineer.... Front are componets and rear are regualar. Make an offer
http://www.explorerforum.com/data/2/12558stock_speakers_1.JPG
http://www.explorerforum.com/data/2/12558stock_speakers_2.JPG

dibs on silverstars...

do they shine any pigments out? if so, blue? just a bright white?

thanks :)

bleh, delete this (double post)

They are just VERY bright white. I had soem on my explroer and they were just bright white. they look a little blue on my mounty because of the headlight design.

If you have AIM please IM me at LowXploHer

shift kit is gone.......

I sent you a quick email but I am wondering where in Va ya from Im in VA beach 23464 and wouldnt mind lookin at your EX......

:D :D :D

Free bump ... and e-mail sent!

Originally posted by boominXplorer
OK as some of you may know my truck is out of commission. This weekend im picking up a 2000 mounty V8 AWD. So Whatever wont fit on it is for sale...... all prices include shipping in lower 48

Sorry to hear about your loss...:( You have a sweet looking ride.

LMK if you get rid of that saleen sway bar ;) ...yeah right, I know!

Good luck with your upcomming progress in fealing complete again.

Cheers!

J

stuff I still have for sale...
-siverstars
-stock mounty speakers
-gauges w/gauge pod
-2 ga rockford wire

If you want info read back to the first posts

are you selling the pod seperate and will they fit autometer 2 1/16 gauges

im confused, are the wheels still for sale or no? thanks

Originally posted by Billy177
are you selling the pod seperate and will they fit autometer 2 1/16 gauges

Only If I find a buyer for the gauges also and yes they will fit

Originally posted by jayhawk137
im confused, are the wheels still for sale or no? thanks

No I have decided to keep them. Sorry!

Originally posted by Ak LTD Xplorer
how much for the gauges w/gauge pod..sorry i should look..but if you could could you remind me?..please..thank's

80$ shipped. You get the gauge pod and 2 APC color changing gauges and the oil sender unit for the oil press gauge. They change 6 diff colors but just the click of the button.

bizzump

bump

Originally posted by boominXplorer
stuff I still have for sale...
-siverstars
-stock mounty speakers
-gauges w/gauge pod
-2 ga rockford wire

If you want info read back to the first posts
bump #10978439075

That pod sounds interesting... if you still have it during the summer, let me know =P

What I have to sell......

-NIB 9007 Silverstars
-stock rear swaybar
-rear axel out of my 95. it nees totalaly rebuilded but if you are a 91-94 guy this is probibly what you want if you want disks in the rear.
-4 door leafs
-stock mounty speakers (componets and regular 6x8's)


What I want.....
-SOA spring perches
-Mono leafs
-stock shackels


The axel is free if you come pick it up. Really interested in a strait up trade for the 4 dr leafs for mono leafs. Everything else just make a offer with shipping from 22408

well i'm taking my stock shackles off in 2 days, if u want them they are yours, let me know, shipping shouldn't be to much, PM me if ur interested

Ill trade ya speakers for stock shackles:D

Originally posted by Texplorer
Ill trade ya speakers for stock shackles:D


OK... These are what the speakers look like..
http://www.explorerforum.com/data/2/12558stock_speakers_1.JPG
http://www.explorerforum.com/data/2/12558stock_speakers_2.JPG

I have a set of stock shackles from a 96 4door. If you want to trade its fine with me. Will those mounty speakers work with the Explorer, I didnt know mountys came with components.

OK sounds good. They will fit right in the place of your stock speakers. Hit me up on AIM at LowXploHer to finish the trade

hey boomin, whats the rear axle like? didnt it go out? what all would it need for a rebuild? could i just gut the gears out of mine and inplant into yours? this could be something i would be interested in, but we'll have to wait to see what mr. checking account says first...

Originally posted by NICE59FORDF100
hey boomin, whats the rear axle like? didnt it go out? what all would it need for a rebuild? could i just gut the gears out of mine and inplant into yours? this could be something i would be interested in, but we'll have to wait to see what mr. checking account says first...

Im pretty sure everything needs replaced. Im nto sure what all you can swap over from your axel but you might want to post something up too see what all is involved

bbbbbbbump

Ok guys I'm fed up with this truck. Its a money pit. This is my old explorer I'm putting up for sale. It has...
-rollpan
-shaved hatch (except handle)
-shaved antenna
-xlt
-60/40 front seats
-4x4

What it needs.....
-rearend
-brakes
-front diffy
-minor tranny work or t-case work?
-and exhaust
-miselanious interior panels

The motor runs like new with almost 150k on the ticker.

This truck will need to be towed from Fredericksburg Va, 22408.

I NEED to get rid of this truck ASAP. Just shoot any lowball offer and i'll probibly accept.

reserve not yet met ;)

shoot, i'd buy it and yank out the tcase and front diff... get some spindles and ditch the 4x4... who needs 4x4 in the South?

$10 !

Originally posted by Hokie
shoot, i'd buy it and yank out the tcase and front diff... get some spindles and ditch the 4x4... who needs 4x4 in the South?

PMing you

Originally posted by boominXplorer
PMing you

right back at ya, hopefully i'll cya this weekend :-)

Originally posted by Hokie
right back at ya, hopefully i'll cya this weekend :-)

thinkin trail rig hokie????

If it's still up for parting how about the driver side mirror? :)

100.00

well its looking like brett (Hokie) has dibs at the moment. Well update later this evening.

Originally posted by boominXplorer
well its looking like brett (Hokie) has dibs at the moment. Well update later this evening.

Damn straight I've got dibs... *drool*

http://www.flexplorers.com/photopost/data/3002/3comparrison-med.JPG

10 AM on Saturday sound good to you Chris? :)

please let me know if it's gone. i'm intrested in it,what are you looking to get out of it and when does it have to be gone by?

Originally posted by Hokie
Damn straight I've got dibs... *drool*

http://www.flexplorers.com/photopost/data/3002/3comparrison-med.JPG

10 AM on Saturday sound good to you Chris? :)

you also moving to Florida:D

That would be sweet!!!!!!!!!!!!!!

i cant wait til lsee

Originally posted by XplorerKid
you also moving to Florida:D

That would be sweet!!!!!!!!!!!!!!

i cant wait til lsee

yeah, I guess I should give Buchvilleman credit where credit is due... his truck is awesome!

10 am sounds good

The truck and title has now been delivered to Hokie

I have F/S
-stock sub, enclosure and amp from my mounty
-9007 silverstars BRAND NEW
-stock tape player from 95
-00 CD and Cass. head unit (display only works half the time, easy fix)

I want..
-95-98 explorer front bumper
-5.0 MAC intake

If i get the explorer front bumper I will have my 00 mounty front bumper for sale (somewhat faded but only a detail freak would notice)

Just make and offer on whatever including shipping fromm 22408.

bump for the night crew

how much are you wanting for the sub and accessories?

wanna trade 2 pioneer 6x9's 220 watts peak for it?

I sent you a PM

how much for the rockford wire and is it a dual amp setup or single?

how much are you wanting for the sub and accessories?

wanna trade 2 pioneer 6x9's 220 watts peak for it?

Really looking for the WTB stuff stated or money. make an offer on the sub package

how much for the rockford wire and is it a dual amp setup or single?

Sorry forgot to update this, Its sold

how much for the silverstars shipped to 11209?

how much for the silverstars shipped to 11209?

35$

bump

bump

Ill send you $30 right now for the silverstars shipped to 11209.

Sorry but i now have the silverstars on ebay....
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2475552045&category=33710&sspagename=WDVW

is the B&M shift kit still for sale. will it work on a 99 sport with an automatic trans.?

its sold... Only thing left is My dual gauge pod

How hard is it to install the gauges and pods...somethin a novice installer can do???Do they shine blue?? Kinda interested in them...lemme know...

can you hook up a cd player and change your own oil? if so you can do this. Only thing that might be troublesome is getting the oil sender in. There is not much room to work in but it just takes time. It changes light and dark blue. I'll get a pic up for you in a min

http://www.explorerforum.com/data/2/12558gauges.JPG