well i took my intake apart, yadda yadda, and i noticed that the torx bolts used have a post thats in the center so you cant use a regular torx hand driver. What tool do i use to un screw them? i have a 96 sport OHV so i have the big round air filter assembly. I was wondering if i could just use elctric motor cleaner on it, like just spray it into the tube. here is the link for the stuff

Performance Plus 3 (http://rc-bargains.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=RB&Category_Code=TAE)

its fast evaporating and zero residue

You can either dremel the peg down, or get a secuirty star torx bit from any local auto parts store (pretty much). I used an electrical connection cleaner on mine. Its probably a lot cheaper than that stuff and you can get it locally. Good luck!