Somebody please help me. I thought I was pretty knowledgeable about installing radios' until today. I have a '93 Explorer and wanted to upgrade the factory deck to a decent CD unit. Power is fine but I can't get the speakers to work! I cut the plug and tried to wire to what I thought were the speaker wires, but no. Any advice would be deeply appreciated.

Well if i were you i'd just wire your head unit cd player right to your speakers. Not sure what kind of factory radio you had but don't forget the stock amp. The speaker out what your tring to wire to goes to your amp, then out to your speakers. You don't want to push power into your amp. Do you have a amp? If so use the low level outs and run them to the amp, then to your speakers. If no amp, run your speaker out wires right to your speakers. This should work. Later...

------------------



albums.photopoint.com/j/View?u=38196&a=247316&p=10777378 (http://albums.photopoint.com/j/View?u=38196&a=247316&p=10777378)