ok my x somtimes stalls or almost stalls when i leave for work in the morning when i drive down to the main road and stop and then pull out like normal it almost stalls somtimes stalls. and its also acted like it was outta gas like when i do around 45-55 and i go down a hill and slowly give it gas it will almost stall now it only does this everyonce in awhile anyone know what could be wrong. ok i topped my rad. coolant off it was like a gallon or so low cause the rad must be leaking now anyway i filled it back up and now it hasnt stalled for the past couple days does that make since any information please thanks

it cood be lots of things have you clean the maf lately they get cloggd up sometimes cause stalling problems search for stalling problems the iac could also be clooged how many mls are on the truck i dont think the rad has anything to due with ur problem have u replaced the fuel filter at any point

yes i just changed the fuel filter and it didnt change anything and what is the maf and the iac i think i know what they are but i need refreshed

Robb, you're my hero.

IAC - Idle Air Control
MAF - Mass Air Flow sensor

i know what that is lol the iac is located near the front under the hood above the horn

Well, I'm not so sure you do know. The IAC is bolted on to the intake manifold on the driver's side. The MAF is right behind the air filter on the intake tube.

it has like 18?,??? somthing like that it only shows 8?,???

ok sorry i was thinking about the palution thing thats right above the horn on the driver side how do i clean the mafs

1. Take it out.
2. Spray it with electrical parts cleaner.
3. Let dry.
4. Install.

ok thanks what about the iac

ok i gotta go to a dr opp. ill be back in a bit but anyone with more info please post at will

When you get back, you could search for "iac cleaning" and "maf cleaning." You will find out more by reading those threads than by waiting for someone to answer you.

ok i know where the iac is i rem my friend was working on my engine with me and he noticed it wasnt idleing right so he taped the iac a lil bit and it started to smooth out
ok i will thanks for the information you guys