|
View Full Version : 33's on stock alloy rim? With TT and shackles? ryanmagahis 02-19-2007, 07:32 PM would it work and look good? Or would I have to do a little fender triming and where? The TT would be about 2" or a bit more if it wont harm anything. I have 2wd. Anyone have any pictures with jsut all that or what it would turn out to look like? Thanks!:) MountaineerGreen 02-19-2007, 07:58 PM Short answer- no Read this- http://www.explorerforum.com/forums/showthread.php?t=153710 justin146 02-19-2007, 08:33 PM with lots of trimming, here are some 285/75/16's... kert0307 02-19-2007, 08:47 PM since you're 2wd if you added spindles and add-a-leafs you could pry do it without too much trimming and it would still be rather cheap. Dan Whitaker 02-20-2007, 08:57 AM Moving this to the Tires & Wheels forum. The search tab is your best freind & will keep us moderators off your:mattmoon: crash3 02-22-2007, 11:05 AM this is probably stupid sounding but i am new to the build up of trucks.(Im only 17) but what is a TT or an AAL for that matter. Dan Whitaker 02-22-2007, 11:09 AM TT= torsion Twist. It applies to 95-01 only. AAL= Add-A-Leaf and applies to all Explorers with rear multi-leaf springs. |