I got a lot of request on a how to guide on how to apply a large decal.

Step 1
Make sure surface is clean

http://www.blee1099.com/windshield/IMG_3452.JPG

Step 2
Find suitable location for decal and position correctly.. IE centering or other justification.

http://www.blee1099.com/windshield/IMG_3453.JPG

http://www.blee1099.com/windshield/IMG_3454.JPG

Step 3
Secure decal with tape.. I'd recommend blue painters tape or similar type. Regular yellow masking tape seems to have too much adheshion quality. I used the hinge method basically taping up in the center to make a hinge effect. Shown above.

Spray 1/2 the surface with a mixture of 1/4 teaspoon of soap and 1/2 a teaspoon of rubbing alcohol to a 20 oz of water via spray bottle. Remove 1/2of the silicone treated release liner and apply to the side where you sprayed and squeegee out and repeat for the other side.

http://www.blee1099.com/windshield/IMG_3455.JPG

http://www.blee1099.com/windshield/IMG_3456.JPG

Before removing the application tape off the decal, let it sit for a good 5 minutes in case any of the water hasn't evaporated yet.

Finished result
http://www.blee1099.com/windshield/IMG_3457.JPG