|
View Full Version : 2004 2wd ranger xlt suspension lift betts138 05-10-2009, 02:01 PM looking for a lift for my truck don't really wont a fab tech hear bad about them like camurg but pricey would like a rcd but dont they stoped making lifts for rangers in 2003 can someone help me find a lift or recommended a lift thanks 1993fordexploere 05-10-2009, 02:35 PM well......besides the lift kits you described i really cant find much. you could do a body lift? betts138 05-10-2009, 05:00 PM do you now if the 2003 rcd lift will fit the 2004 Scott B. 05-10-2009, 07:12 PM Should fit just fine. Make sure you get the correct kit - torsion bar or coil spring to match your truck. betts138 05-10-2009, 07:56 PM has any one tried to put 2003 RCD lift on a 2004 i know the 2003 rotors are bigger than the older ones but my truck has the same size as the 2003 i just wont to be sheer before i spend 2000.00 for a lift Scott B. 05-10-2009, 08:58 PM If your rotors are too big, you can swap to the smaller diameter ones with only minimal change in braking characteristics. betts138 05-11-2009, 12:03 AM I'm also look to get a programmer for my truck any suggestions carlover 05-11-2009, 12:16 AM nothing wrong with the fabtech lift spindles. press out the snouts that come in them and press stronger factory ones in and your good to go. also if your looking for a performance lift i have a buddy that makes kits for these. either mid travel or long travel. betts138 05-12-2009, 02:24 AM anyone use a bama programmer just wondering the pro and cons of it thanks |