Will the rear axel with disc brakes from and 98 and up bolt right up to my stock rear end of my 94

what about the front 3rd memberwill it bolt right up too

and if the rear does bolt up what changes to my 94 will I have to make to accept the disc breaks seeng as I have drum breaks

also the newer axel would probably have 4:10 gears in it would there be any changes I have to do to my computer

Thanks
Ryan

http://www.geocities.com/pg4x4/rearendswap.html

It's a common and easy way to get disk brakes. The gears in the front will have to match the rear...so if the new axle has 4.10 so must the front. Nothing in the computer should needed to be changed.

Thanks brotha

I guess this would be the time to consider a spring over to ey.

if you're going to do that don't forget about the front. The SOA lifts the rear about 5" so if you leave the front alone it would sit a tad bit off....ok....so alot off.

I kinda like the raked look.

then I will put some wheelie bars on the back too
I will aslo run my stock 235/75 and see how many odd looks I get

Ryan