Has anyone that uses the AutoXRay OBD II scanners used the PC Link Software ( http://www.autocheckup.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=achkup&Product_Code=41000&Category_Code=SFT ?

I just received mine and plan to give it a go tomorrow.

Yes, I have been using it since it was released last year (actually have two copies/cables). It is somewhat limited in what it can do though. I have been working with the manufacturer to try and get them to make it more user friendly though. There is also a bug in version 2.0 where it won't import the Capture data to create the graphs. I'm not sure if it has to do with the PC-Link version 2.0 or the fact that my scanner was just updated to version 2.1 last week when I stopped in at their factory.
The AutoXray hasn't worked right on the '97 & '98 Explorers since it was released. I have checked my scanner on Alec's '96 and it worked flawlessly. I haven't checked any other Explorers. The Owner upgraded my scanner to Enhanced Ford support at no charge to work around most of the problems tough. The last remaining serious problems were it would loose communications during Monitor or Capture when ever the engine was put under any kind of load (such as when driving). When they updated my scanner to 2.1 it fixed the Monitor mode. The Capture mode still looses communications whenever the RPM goes above 4000 RPM. That concerns AutoXray and they want me to drop off my Explorer again in a week or two so that they can find out what is up with the software.

They are supposed to be posting new updates to both PC-Link and the Scanner firmware any day now. It might be on their now, the last time I looked was last Friday. When I spoke to the owner last week he said to give it a couple of days for the updates to show up on their web-site. I don't think the sanner update will be any newer than the 2.1 they put in last week though. Once they figur out the last software bug, they should be posting another update. My PC-Link is version 2.0 which will have a new update posted. Hopefully it will be more functional.

Be sure and use PC-Link to upgrade both your scanner's firmware and PC-Link software once you get it up and running. The versions available should be much newer than what you have now. If you haven't already purchased Ford Enhanced OBD-II support, it is a very worthwile investment. It added 44 additional parameters to my current 23 that I had with Generic OBD-II support.

Take a look at DiagTek (http://www.diagtek.com). This tool will not only read and clear engine/emissions codes, but it will also diagnose the airbag, ABS, auto temp control, GEM and other modules on your Explorer.

DTek, your link doesn't work. And is your only point on this site to solicite your site? All 4 of your posts have just been advertisements.

Robb

How much do these badboys run?

DTek..Your equipment seems too overpriced for a cable and piece of software. But maybe thats why you solicit to find some innocent sole with money