I tried to 're' and 're' my Vacuum Modulator Valve today.
I had great access through the access hole in the tranny hump from inside, but it won't budge coming out.

I actualy got it to turn but it's just the diaphragm body that's turning, not the shaft that's in the tranny.
I also tried to gently pry it with a bar but it's not moving.
The hold down bracket has been removed.

I definitely need to replace it, tranny fluid was streaming from the vacuum hose before I tried to remove it, and it's sucking fluid into the engine. Losing lots of fluid this way.

Any other ideas before I take it to the dealer?