Does anyone here know the best way to remove both front seats in a 1994 XLT (no power seats or anything fancy)? Any and all help will be greatly appreciated!

It should just be 4 bolts, not that hard at all.

Always good to hear that something is a lot simpler than you thought it would be! :D :D Thanks a bunch!

The hardest part I had taking out the front seats was disconnecting the drivers seat from the seat belt holder. On mine there is a little push pin type deal the has to come out and another little bolt that holds it on. Other than that it is just the 4 bolts.

Take the front bolts out first, then slide the seat all the way forward then take the rear bolts out.

This puts the seat closer to the door opening and also centers the tracks all under the seat. FIts through the opening better.

I just had mine out a couple of weeks ago. You also need to disconnect the seat belt slide. I had to disconnect it from the seat instead of leaving it connected to the seat and disconnecting it from the floor.