Auto & Truck Parts For Sale

I have a 1998 Eddie Bauer Explorer that I will be parting out. I will start with any of the "gold" Eddie Bauer outer trim pieces. Pm me with what you need and I can price it plus shipping in the CONUS for now. There are a few interior trim pieces however for the most part, almost everything inside is broken. Near locals wanting body panels like door and hatch will have to pick up and bring your old door or hatch to put back on it because for now, I'm going to use it for storage in order to empty out my '92 and 97 MM. Let me know what you need. Greg in north Alabama. PS occasionally pieces could be shipped as far as Phoenix AZ.

I have a pair of overland awning mounts for the factory roof cross bars on a 1st Gen Explorer up for sale. Fits many of the basic awnings with the extruded aluminum mounting plate on the back like the ARB, Ironman, Napa, etc. $52 shipped in bare steel without hardware. (Pics show another pair of mounts I sold a few years ago, the mounts for sale are the same just not painted or with hardware)

I have a brush guard from my 1997 Explorer for sale. Would probably/might fit other years, but not sure. Based outside of Philadelphia. $100 and if you want it shipped, you pay. Cost to ship would be ridiculous though.

Freebie... 4 - 15x8 wheels. 5 on 5.5" Pickup only, will not ship. Located about an hour Northwest of Phoenix, AZ.

Contact 602-907-8582 email greggigabits@gmail,com

Converts rear shocks from post-to-pin to post-to-post, giving more shock options. Text to 602-907-8582

TEXT TO 602-907-8582

New unused! six oh 2 9 oh 7 8582 text please

I have been backwards engineering 1st gen parts and printing them. This is my current stock. Material is PETG (better durability and higher temp than basic PLA, think water bottle material) These have been test fit in my 1st gen, Stripe, so I know they work. These are unfinished so you can finish and paint them according to what you want. I suggest sanding and self-etching primer before paint. There may be some small defects from the printing process, but these do not affect functionality of the part. Current stock: 1st Gen Passenger Air Vent Surround - Black PETG - Unfinished - $35 ea

Well it's time to purge guys. Looking to move shop in the next year or so and need to clean up my extra junk instead of move it. I've got a ton of stuff and will be constantly editing my first post. No catalytic converters available. Anything bigger than say 24x24 will be local pickup in VA beach, VA. I can sell whole trucks cheap if wanted for a swap. Can arrange east coast shipping if needed. Parting a 2001 Explorer v8 awd, 185k mi still runs and drives. Damage to right rear door, quarter and hatch. XLT trim, tan cloth interior. Black in color. Completely rust free, have title, would sell whole for $1250 Parting a 2000 Explorer v8 awd, 200k mi still runs and drives. Interior is somewhat rough from sunroof leak and sitting. Previous...

Note: Running Boards and Tires are local pickup in San Fernando Valley Also Note: All prices are negotiable!!!! For all I know, I way mis-set the prices!! Donor Vehicle: '98 XLT 4dr Unless otherwise noted Anyways 😀 Stock PREMIUM Headunit (Not to be confused w/ MACH!) Condition: Good, but the CD Digital Processing text has rubbed off, worked well when it came out of the vehicle Price: $60+Shipping Passenger Side Rear Cubby Thing Condition: Good, but elastic has stretched over the years Price: $10+Shipping F/R Carpet Floor Mat Set Condition: Rears- Good, Front Driver- Fair, Front Passenger- Slightly better than fair Price: $30+Shipping 3 factory crossbars Condition: Fair- has some paint drip Price- 15 each or 30 for all 3...

I've got quite a few parts to get rid of from my ongoing 2016 Ford Explorer Police Interceptor Utility project. Some pictures, and some items still need to be photographed. 1. Both front black bucket seats(cloth) 2. Basically the whole factory cat back exhaust. I have the factory mufflers and Flowmaster mufflers with tips welded onto them. Willing to seperate. 3. Civilian console floor shifter and handle. 4. Terrain knob/dial 5. Factory radio. Sync 1. Manual climate controls front and rear. Faceplate, Bezel, 4" screen. (Installed Tesla android radio. Right now the audio control module is still in my dash but think I can remove it for sale too....tbd. 6. 3 quart water methanol reservoir. 7. 5 litre water methanol reservoir 8. Custom...

Evening, for sale is an Advanced Adapters conversion kit that adapts the 60* 700r4 to the Ford 4.0 OHV. The tail housing is also included. The transmission was supposedly rebuilt when I purchased it but I have no way to confirm that. A B&M shifter is also included. I purchased this transmission and kit from JTX on the board years ago and never used it. The torque converter and mounting hardware are not included. I will post pictures when I get home. 1k O.B.O. You can text me if you would like (9two8)three08-777five. The transmission is located near Prescott Arizona but I am will to meet an hour or two away. Thank you for looking all.

I have a complete PATS system for sale. Everything you need is here. Came out of '01 Sport SOHC AUTO 2WD. Includes: ECU PATS Module RAP module (keyless entry) PATS Key (only have the one) Matching ignition and door locks $350.

For SALE: Excellent set of tires & wheels from a '17 PI Utility. Wheels are OEM 18x8 steel, gloss black finish. Tires are Firestone Firehawk PVS 245-55VR18. Tread wear is exceptionally consistent across all four tires. Average tread depth is .214", about 62% of the original .340" value. These are one of the highest rated all weather/winter pursuit tires available. Review: [ www.prioritytire.com/blog/firestone-firehawk-pvs-review/ ] Sales Sheet: [ www.prioritytire.com/by-brand/firestone/firehawk-pvs-tires/ ] Priced at $600. includes the full set of lug nuts and if you want, the four OEM full size plastic silver colored wheels covers. (This is why the paint finish looks new on the wheels, since they were always protected from...