Auto & Truck Parts For Sale

Up for sale is a few good items, in need of a new home. Will ship to the lower 48 states only, or you can pick up. Will use USPS flat rate when applicable. NIB- Dorman leaf spring shackles. Comes with new hardware. Set of two (2)- $65 shipped. *SOLD* NIB-91-98 2wd/4wd Daystar urethane body bushings, full kit, direct replacement. - $100.00 + UPS shipping in original box, or USPS Large flat rate box. Big difference in $! NIB- Eibach Coil over springs. Pair of 12.00"x2.50"x650#. - $80.00 + UPS shipping Used set of 4.0L OHV good hydro lifters, non-mushroomed pushrods, Rocker Rails, and head / intake bolts. Lifters are not shown as they are stored in a container of trans fluid presently, but will be drained for shipping...

I recently built some extended radius arms for a TTB but messed up and made 2 left side mounts. That meant I had to make 2 right side mounts and now the extra pair is up for sale. These are fully welded and fit the D35 TTB beams. all you need to do is add 2"x.25" DOM tube and a gusset of some sort. For under a 3" lift the tube is best on the bottom and for over a 3" lift the tube is best welded to the top and the gusset on the bottom. $60 + shipping (around $14) 1st 2 pics is what you get, last pic is how I finish them up for an idea.

like the add says, 4406 shifter and linkage. what is in the picture is what you will get. $100 plus shipping to lower u.s.a. and cross canada. any place else, contact me and we will work on a price.

I've parted out three 1st generation Explorer Sports and have glass, exterior trim, and interior parts for sale. Very reasonable prices - just hoping to help keep these great vehicles on the road. Contact me for anything you need. You'll be surprised by what I have!

I bought this from a guy who was parting out a limo. I'm never going to use it so it's up to you to put this to work.

Hey guys, I am selling my flashpaq handheld tuner that i was using on my 99 ford ranger xlt with the 4.0 OHV engine. i dont have any need for it as i am currently in the process of doing an engine swap. It's in great condition and was also unlocked before the harness and engine were pulled. I am asking $100 OBO for the tuner. I also have my auto 5R55E transmission to get rid of. it was working great while it was inside of the truck but now just taking up space. Asking $100 for the transmission, it has no problems what so ever. shoot me a DM if interested :) willing to ship on buyers dime.

Up for grabs is a front end only, TTB Rancho lift kit. Was removed from a 93 Explorer, but can be used on TTB Rangers as well. $500.00, You pickup preferred. Shipping is completely on your dime, including any packaging materials used. I began restoring this kit, but changed my mind on using it, half way through the job. The Radius arms, RA Frame mounts, TTB arm brackets, shock mounts, and Kick bar have all been fine sand blasted, and ceramic coated. No stress cracks or weld defects was found after blast inspection. Kit includes the Rancho coil springs, and a set of coil spacers. All Grade 8 hardware is used, but all in perfect condition. I would have no issue re-using any of it. The items still in red, have some worn black...

New unboxed Magnaflow high-flow catalytic converter, part number 23388. Never installed. Fits 1989-92 Ford Rangers with 2.9L V6, 1991-1994 Ford Rangers and Explorers with 4.0L V6. Has flange gasket. Retails for $360+. May ship at buyer's expense. Local pickup prefered. Located in Alpha NJ, 08865 $220 or best offer. Feel free to PM or Call/Text. (nine-zero-eight) three-two-three five-two-three-nine.

SET SOLD LOCALLY!

Pair of spindles with calipers and brackets off an 04 Aviator. They are in good used condition with some small hammer marks from previous front end work. Calipers and pads seem good to go but they have been on my shelf for over a year so I recommend using the calipers as cores just so you don't have any issues. These are the best factory brake swap for 02+ Explorer or Mountaineer. It is completely bolt on. THESE WORK ON 17" WHEELS AND LARGER ONLY!!!!! I tried to use them on a larger offset than factory 16s and it wasn't even close. Prices are as followed..... (Elite members take $25 off) East coast: $225 Shipped Midwest: $245 Shipped West coast: $275 Shipped

Complete kit to do the upper/lower thermostat housing problem that a lot seem to get. Also comes with the newer style sensors to swap over and retainer clips. 4L5Z-8592-AA RH165 upper thermostat housing 2L5Z-8592-BB RH144 lower thermostat housing 1L2Z-8255-AA RG614 lower thermostat housing seal W702837-S300 thermostat seal (aka large o-ring) 2L2Z 8575 AA RT1167 thermostat 3F1Z-10884-AA SW6146 temperature sensor 3L8Z-12A648-BA DY1004 temperature sensor 2 - W706800-S303 sensor retainer clips $150 shipped and insured.

Like new! Was installed in the truck, and removed after 2 weeks of use, but with Cabella seat covers on them. Went a different route. Stored in original plastic bags, inside a climate controlled area. These have dual slider base's. Double extra goodness! Drivers has lumber air bladder added! Slotted for 5 point seat harness. Fully reclining suspension seats that are comfortable, and can be used for a Daily driver. They shine on the trails with the side leg & torso supports, that keep you in the seat. Bolsters are not crazy high on these, which makes them great for everyday use. Paid $1200.00, offering them for $900.00 local pickup only, in STL, MO. My loss is your gain. Black on black with black stitching.

Full set of seats from 4 door XLT Explorer. Asking $400.00. Free central Florida pick up or plus shipping cost/method such as Uship of your choice. Drivers seat as pictured has most wear. The seats are complete with tracks and working electric motors.

Black with Chrome and clear, your choice 25.00 shipped. Picture shows white but these are bright silver and black. The Black with Red and Clear , Explorer V8 cover is 35.00 shipped. I will accept paypal Start a conversation with me for details. Thanks for looking!

This was a Ford production line take off. It is exactly what Ford had installed on the production line. It came with a motor I bought. It is the Clutch disc, pressure plate and flywheel from a 2002 Ford mustang GT 4.7l