Auto & Truck Parts For Sale

New unboxed Magnaflow high-flow catalytic converter, part number 23388. Never installed. Fits 1989-92 Ford Rangers with 2.9L V6, 1991-1994 Ford Rangers and Explorers with 4.0L V6. Has flange gasket. Retails for $360+. May ship at buyer's expense. Local pickup prefered. Located in Alpha NJ, 08865 $220 or best offer. Feel free to PM or Call/Text. (nine-zero-eight) three-two-three five-two-three-nine.

I have some left over parts from some front 5 x 5.5" conversions I was trying out. I have a Rh/Lh front knuckles from a 1997 Ford Ranger these would be a upgrade to swap over to the full floating front brake calipers, I also have the calipers, caliper brackets, and some new brake pads to with them. I have a single non ABS dana 35 spindle and a single spindle with ABS. Open to offers on all I'll try to get some pictures up this weekend.

Hello. I have for sale the stock tires from my 2020 Explorer ST. They have less than 200km (so 120 miles) on them as I put winter tires on the stock rims when I purchased the ST last October. So they have sat in my garage all winter waiting for a new home. I just purchased 22 inch summer wheels and tires so I no longer have a need for these. They are 275-45-21. I live in Edmonton, Alberta, so hopefully there is another Explorer ST owner nearby! Not sure about shipping any great distance but I am open for suggestions.

I have a ton of parts for first gen Ford explorer and ranger. I have pics of everything available, if it's still on the list, it's still available. Willing to ship any of the smaller stuff on buyers dime from San Diego. Brian Fab polyurethane motor and transmission mounts - 100 for the set Custom bolt on prerunner style winch bumper - 100 Custom tube rear bumper with hitch - 80 Stock grille tan - 20 Passenger head light assembly - 10 Passenger tail light - 10 Light switch - 10 Review mirror - 5 Ac compressor - 10 Alternator - 20 Nearly new (less than 100 miles) coil pack - 40 Nearly new (less than 100 miles) ignition module - 40 Instrument cluster with 70k miles - 20 Computer for 91 explorer without egr - 40 4x4 switch - 10 Driver...

A few years ago I acquired an A4LD pump housing cutter tool from a small town auto shop that went out of business with some other stuff. The tool has sat on a shelf since then because I don't deal with Automatic transmissions as all my Explorers are manuals. So up for sale is a tool to bore for an oversized pump housing bushing in a Ford C3 or A4LD automatic transmission. A-115 part number. I don't think these are easy to find now and it was an expensive tool. Selling for $40 + shipping, OBO! See photos for details.

SET SOLD LOCALLY!

Like new! Was installed in the truck, and removed after 2 weeks of use, but with Cabella seat covers on them. Went a different route. Stored in original plastic bags, inside a climate controlled area. These have dual slider base's. Double extra goodness! Drivers has lumber air bladder added! Slotted for 5 point seat harness. Fully reclining suspension seats that are comfortable, and can be used for a Daily driver. They shine on the trails with the side leg & torso supports, that keep you in the seat. Bolsters are not crazy high on these, which makes them great for everyday use. Paid $1200.00, offering them for $900.00 local pickup only, in STL, MO. My loss is your gain. Black on black with black stitching.

Up for grabs is a front end only, TTB Rancho lift kit. Was removed from a 93 Explorer, but can be used on TTB Rangers as well. $500.00, You pickup preferred. Shipping is completely on your dime, including any packaging materials used. I began restoring this kit, but changed my mind on using it, half way through the job. The Radius arms, RA Frame mounts, TTB arm brackets, shock mounts, and Kick bar have all been fine sand blasted, and ceramic coated. No stress cracks or weld defects was found after blast inspection. Kit includes the Rancho coil springs, and a set of coil spacers. All Grade 8 hardware is used, but all in perfect condition. I would have no issue re-using any of it. The items still in red, have some worn black...

I bought this from a guy who was parting out a limo. I'm never going to use it so it's up to you to put this to work.

This was a Ford production line take off. It is exactly what Ford had installed on the production line. It came with a motor I bought. It is the Clutch disc, pressure plate and flywheel from a 2002 Ford mustang GT 4.7l

These are a great upgrade. Low beam has a sharp cutoff like projector headlights. Comes with 60/80 watt bulbs https://scontent-msp1-1.xx.fbcdn.net/v/t1.0-9/p720x720/87301898_4047265435298571_574000113999937536_o.jpg?_nc_cat=110&_nc_sid=843cd7&_nc_oc=AQlJYggUNOKz8eZzPcv36HKbyGOBHJMhbelTylpULdFWG1t1Y4aYVopnG542dIDMzLU&_nc_ht=scontent-msp1-1.xx&_nc_tp=6&oh=fc4bf3d30adb77a61bb176ba90919d07&oe=5E832A11

These 4340 chromoly axles also have virtually indestructible CTM u-joints installed in them. The long side are brand new unused, un-assembled. The short side have been assembled and run, but are in great condition. I ended up getting a set of RCV axles instead.

These axles are for the 11 x 1.75 drum brakes. I ended up going with disk brakes and had to change axles to do it. One axle is new, never installed. Comes with new Timken bearing and seal. The other has been ran for a while, has Timken bearing and seal installed.

I bought this as a trail spare. Since these are so dam tough, I never used it. This will work on any Dana 44 front axle shaft that would use the 5-297X u-joints. These sell for $285.

This controller varies the speed of your electric radiator fan so that it only provides the amount of speed needed to cool your car. This also means that is doesn't have the strong current surge from turning the fan instantly on. It is not compatible with the Taurus fan though. Anything with less current draw than a Taurus fan and you are good to go. These sold new for $90