Auto & Truck Parts For Sale

First Gen 4" Front end lift from Explorer $250 + shipping Includes springs, stainless brake lines, 3.5 drop pitman arm, front rancho shocks, and drop brackets only. 'Dannyboy' mentioned on Post #15 it's a Trailmaster - be sure to read his post. I purchased it used - the picture is when I purchased last spring and was told it was removed from an '87 Ranger. I'm upgrading to an 8" lift. The steering linkage and swing arms pictured are not included (not that you need them), nor are any rear lift parts included. You will also need extended sway bar links - depends on your setup. May need some hardware to bolt to frame, I'm not sure - I'll send as much extra bolts/nuts as I can. Uses standard radius arms. *Update 11/6 11:15am...

I'm breaking down RJ's old rig, and getting rid of stuff I don't need for the build. So if you see something you would like let me know and we can make a deal. I'm not looking to make a fortune, just fund some parts for the project and move on. The parts below have come off a 1991 Mazda Navajo: AKA Explorer Sport. * Rear Glass Windows - Includes both side and pop out with working latches * Rear Liftgate Glass- Includes cool McNeil sticker:thumbsup: *91-94 Explorer/Navajo Fiberglass Fenders: I believe these are the 4" bulge from McNeil. Driver side need to be repaired as you can see below. $100. *Front Pre-Runner tube bumper, I'll even throw in the lights if you want them. Make a offer *SOLD! Rear Bumper with Tire...

engine/trans/tcase gone... has M/C and climate 4 good alloys with tires diffs available rear parking sensors x 3 with wiring other bits... Si

My 96 Explorer 5.0 V8 got totalled out so I pulled off all my aftermarket parts before they took it. -Torque Monster headers SOLD -LPW differential cover/girdle SOLD -MAC air intake (fits 1996 5.0 Explorers, paid $200). Includes MAF sensor and IAT sensor still in the pipe SOLD -Magnaflow dual in dual out polished muffler 2.5" with x-pipe SOLD -Bilstein shocks for rear of 91-01 Explorer SOLD -Street Scenes mesh grille inserts including custom one for bumper SOLD -B&M electric shift kit SOLD -(4) Explorer center caps SOLD -91-01 Explorer factory shackles SOLD -Drawtite tube style hidden hitch SOLD -Grey husky cargo liner SOLD -Brake controller for trailer brakes $40 -Trailer tow harness with 4...

Trying to get rid of some Explorer part's I've had lying around. Take a gander, I'll be updating this as stuff comes and goes. Everything is priced as marked plus shipping. Pair of 98-01 Rear taillights: $30 SOHC Engine covers: $20 a piece. 4.0 SOHC intake tube: $10 Tan rear carpet things: $10 for each. Long console ash tray: $5 A-pillar interior panel, passenger side. :$8 A pair of roof cross beams. $10 a piece.

SOLD I am posting this for a friend, it's not mine. And not in my posession. I am just helping a friend get it posted. Here's the story: The truck was wrecked, but complete and running. He has the whole engine. The EE X-charger kit did not come with a chip since it had low boost with the stock pulley. The belt did break but he will ship it for the part # and length reference. All parts are now removed. All bolts bagged and tagged. This is the rectangle inlet blower with the coated rotors. Rotors are excelent, no chips or flakes or anything. $1500 shipped insured. If it doesn't sell here, he will put it on eBay....but he is trying to avoid paying the listing fees. All pics that I have I posted. I will see if I can...

selling my winch bumper off my old '91, I was holding onto it in case I got another explorer, but thats not likely. Here are some pictures of it on my old truck: I'm asking $400 obo, will put a fresh coat of paint on it. The KC's and winch don't come with it, but I can include new fogs and side lights if buyer wants. If interested, we can work something out, bumper is still in memphis and I am in alabama.

Blew the second motor in my truck, and i just dont have the time or money to keep up with the project. So I'm parting her out. Here's a short list of parts: RLC winch bumper,Superlift lift kit, Front IFS axle has Yukon 4.88's and lockrite, has welded on sliders and welded on rear homebrew bumper. It will take me a while to pull the lift kit and front axle but let me know if you want it or make an offer. If someone wants all of it and wants to flatbed the truck, I'd let it all go for cheap. Please note I'll be keeping the rear 8.8. Email me at james.haun@gmail.com and I can send pics of whatever you want to see. Thanks!

Like titled, brand new in box 98-01 taillights. $60 shipped and insured. IMG_0098 by ZWilson07 posted December 9, 2016 at 11:58 AM

so ive been not wanting to do this but im going to try and sell these wheels...i bought them about 2 yrs back and theyre still in the original shipping boxes i received them in...wheels are sand blasted...i wanted to powdercoat them flat black but didnt want to start this project until my other wheels sold but they did not...still trying to sell those also...i cant get a picture of them due to the snow and ice covering my shed in the back yard...if anyone is interested and lives near by nyc i will try to attempt to take them out...trying to get what i paid for them which was 600...to ship its most likely going to cost some money...will try and dig them out this sunday and get some pics up if your interested and live locally to check...

This is just out of my 2000 Limited. Worked and sounded damn good before I installed all my aftermarket audio. Looks like new still, no rips/tears/scuffs anywhere on the sub. BEST OFFER+SHIPPING! I will take trades: -Nice 5x7 speakers (2/3 way) -Really nice tweeters (W/ crossovers) -Anything performance wise for a 2nd gen V8 -Etc

Sold

(SOLD)SCT Flash Device - $175 I have my SCT Flash Device for sale. Great for clearing pesky CEL codes when the pop up. I got this through Henson Performance, and I'm sure they will be more than happy to write some tunes for you to upload. Great customer service over there. This has only been unlocked once for my truck. They can be unlocked three times for different VINs. Someone can correct me if i'm wrong. SCT also has great customer service when it comes to these things! $175 gets it shipped to you. There is one catch. I hade this sold and sent out but the buyer notified me that it was showing an error. He communicated with SCT and finally they said for $65 they will fix the error. Hence the reason I'm selling for...

New in box never even unpacked it. Fits Ranger, 83-97. Explorer, 91-94, Bronco II, 88-90 Asking $150.00 plus shipping. * Keep in mind shipping from Arizona to California is about $60.00 If you are in the midwest or east coast you can still buy these new from Summit for $307.00 free shipping. So it would be cheaper to go that route. If you are in Arizona, California, Colorado, Nevada, this will save you about $100.00

i have a driver side reclining lever assembly, a gray full length console with all the gadgets and gizmos included (wire harness, air duct, rear controls, etc.) the only thing is that its missing a couple of screws and i pulled the cd changer out so the inside plastic thing is not there but it can still hold stuff, the tissue/ coin holder is not there. and the passenger side 12v outlet is gone. the outter skin on the lid has a tear from wear and was covered by the trucks previous owner with a little black no skid thing. don't know what its called. i also have a 97 2 wheel drive GEM. the truck it was pulled from had foglights and rear defroster and wiper/washer. i put in another out of a 96 4x4. make offers, pics after i clean the...