Explorer / Ranger Truck Of The Month Winners | Page 2 | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Explorer / Ranger Truck Of The Month Winners

Our members will vote on one of our "Elite Explorer" trucks each month to include in this forum. Good luck, I hope to see your Explorer or Ranger in here!
 
For the first week of your December Special we have Cybergasm's explorer. Not only has he taken the time to get another explorer wheel it but he is also a great guy. He is always nice on the runs that he is attending but he also has a great presence her on EF also. This one is for you Cyber. Info From His Elite Explorer Reg: 1991 Explorer XLT 4X4 I purchased this Truck in June 2007 for the measly sum of 800.00 from the previous owner who resided in Mesa AZ. Ran and Drove but had engine problems so it had to trailered home to California. Where it has sat for the last few months waiting patiently for new motor. Here are some specs on it The Vehicle: '91 Explorer XLT model 145k on the clock. OHC V-6 Auto Trans Manual T-case...
Powertrain Supercharged 5.0L V8 4R70W Transmission BW4406 Manual Transfer Case 4.10 Torsen Rear Diff Aussie Locker up front Torque Monster Headers Magnaflow duals SLP Thunderbolt Airbox Chassis Bilstein 7100 reservoir shocks front and rear Mustang SVO/Cadillac rear disc brakes James Duff traction bars Front and rear sway bars Sway bar disconnects Explorer IRS diff cover Alcoa forged aluminum wheels 31x10.50x15 BFG ATs Exterior Silver Frost Keypad entry Heated Mirrors Rhinolining AMP bedextender Tailgate lock DrawTite hitch Dual rear LII tow hooks Black Headlight Background 06/07 Corners w/Black Background 06/07 Ranger Emblems 06/07 Ranger Taillights Interior Ebony/blue Heated seats Explorer EATC Climate Control Explorer Limited...
A truck that has been to the top of the world And one that has been completely off the world!! 1991 Mazda Navajo 4x4, 5spd 4.0L ohv KKM intake Flowmaster exhaust Port and Polished heads Front Suspension: custom cut and truned, extended, and plated beams (2.5" each side) 14x2.5" King Coilovers extended stock radius arms- from McNeil Racing engine cage for the coilovers- from McNeil off-road 4.56 torq line gears Trac-Lok Limited slip Dana 44 intermediet shaft (to make up for the increased track width) 2.5x4" F-O-A bump stops extended steering adjusters and straightened pass. side steering linkage. stock pitman arm Rear Suspension: custom Deaver leaf springs eBay shackles (same as warriors) 2.0x11" Fox...
The Truck of the Month is not only for those who have amzing rigs but it is also for those members who bring life to the forum. Those who are helping and show a concern for others here at EF. Its not about having a truck that has every mod you can think to have on it. Someone once said "well maintained, slightly moded, stock looking trucks are just as important to their owners and this site as are the others." This month goes to Sam. So everyone tell Sam what you think.
Our truck of the month this month is a nice looking ranger. Scotty J came to us with a ranger and then just started having fun. Here is to your great looking ranger After 3" Body Lift and With 285/75 R16 (33"x12.5") tires and Cragar 16"x8" Soft 8 Wheels The Fender Mash: 4x4 with 4.0 SOHC 6 Banger JBA Cat4ward Headers K&N Generation II FIPK Filtercharger Injection Performance Kit 3" Body Lift Cragar Soft 8 Wheels 16x8" 285/75 R16 BFG TA KO Where he wants to go (for starters anyway): Dixon Bros Ranger/Explorer 4wd Long Travel Suspension (with optional Hydraulic Bumpstop Mount and Steering Clevis Kit) Dixon Bros Ranger Bed Cage Dixon Bros Shock Tabs for Rear Spring Plate...
For February 2009 I am selecting Evan's awesome Mountaineer. He is currently not able to access the internet because of the bad ice storm that just hit about a week ago. Evans Mountaineer is getting this monthly award not only for his work and craftsmanship but because he has several helpful "How To" threads. Some of his "How To" threads are: Lower Ball Joint Replacement Upper Control Arm / Ball Joint Replacement Inner Tie Rod Removal and Replacement How To: Leaf Spring Removal / Installation / Swap He also has a build work log. PS check out the superlift: Mountainnergreen's Mounty Buildup Worklog He has does some great work on his truck and on this forum. Here's to you Evan! :wavey: Mountaineergreen's 2001 Mercury Mountaineer...
Its that time to be thankful and since its thanksgiving its a great time to kick off our apperation to those on this forum. So for the rest of the year we will have one rig per week. Each thursday a new one will come out ending on Dec. 31. The first rig is one which I have been able to see in person. It goes good and looks good to. Its owner is a great guy who can put together a great off road trip. Oh and I was allowed to drag this explorer a little. I wont post that picture today but anyone eles can. Here is to you Greg. His Elite Reg: I figured it was about time to get my registry going. I have been Modding my 95 XLT since last September. It was completely stock, and had a bunch of "health issues". First thing was to get the...
Exterior Lockright rear/ no-slip front 2" TT and Shackles 3" Bodylift 35x12.5r15 Pro Comp M/Ts on black wagon wheels Atlas II 5:1 4.10s f/r rancho shocks (currently the rear ones have both been ripped off.) AALs/ Double AALs Herculined rockers Custom rocksliders Flowmaster 50 series car back (Ripped off and currently sitting in the back of the truck) Lightrack w/ hella 500s and KC daylighter Backup lights. Interior wise Ripped out the carpet and herculined the floor Cobra 29 cb & K40 Ant. Hard Mounted my mag light and fire extinguisher Pioneer deh-4400 HU Pioneer something or other speakers in the doors a-5865 all around Hand Throttle Future plans SAS somewhere sometime Cut the body lift...
Its that time again. This month's Feature Truck goes to a guy who has a lot of time and work in his Mounty. Using his words the "madness set in" and he now has one of my favorite trucks on the forum. This month Feature Truck goes to Turdle and his Awesome 1998 Mounty. It is one street truck that has gone wild. Hopefully I will be able to catch with with him here soon. Here is to your work Jon. :thumbsup: Check out his build thread. I just listed the motor specs. Yeah its lifted too with a pretty nice lift kit. The Goods and Build Thread Link: 347 cubic inch, stroked and bored engine FMS sportsman block-bored .030 over and machined for stroke Billet crankshaft with chev rod journals H-beam ultra light rods Probe...
Chief's Giant -91 Xlt explorer. -Solid Axle swaped with national soft ride leaf springs. -37"X12.50"X15" super swamper SSR's with 15" American Eagle rims. #6- 12" fox shocks with resevoirs and billet clamps. 4 front and 2 rear. - 4.88 gears front and rear, (Lockers coming soon). -Billet grill, Clear corners ,hood pins, bug deflector, dual cup-holder. -silver faced gauges that will be sooned changed to Autometer gauges in a custom dash pod located in the stock location for a clean install. -5.0 mustang engine, and T-5 5 speed transmission swapped recently. -Custom Wiring by Brett at "High Planes" -Long tube headers, 9mm plug wires, K&N conical Filter -Custom 3" single exhaust with High flow cat and Flowmaster muffler...
This is a nice looking explorer that has been pointed out several times to me. It is one of the cleanest and nices d30 swaps I have seen. So here is congrats to Ben. Ben Irwin 1994 4x4 Explorer Sport Modifications- Bored and overhauled 4.0 BBK Headers BBk Throttle Body MAF K&N 33 12.50 15 Cooper STT 15x10 Weld Stone Crushers High Pinion Dana 30 (Cherokee) Rubicon Express Long Arm 4.56 Front and rear Detroit in Rear Rear Disk brake conversion SOA Rear 4 inch TJ Coils Stainless Steel Brake lines Manual t-case swap Stock a4ld Billit Grill HID's Euro lights Piaa 520's Warn 8000 Custom Front bumper Glass front fenders Flip out Jensen DVD player PS2 in glove box location Memphis and diamond audio system 2...
This month the Truck of The Month is going to a guy who has not been around his Explorer in a while. He has been serving in Iraq for some time now and should be on his way back to the states very soon. (a few days or already on the way im not sure yet) Some info on his Explorer: Exterior Lockright rear/ no-slip front 2" TT and Shackles 3" Bodylift 35x12.5r15 Pro Comp M/Ts on black wagon wheels Atlas II 5:1 4.10s f/r rancho shocks (currently the rear ones have both been ripped off.) AALs/ Double AALs Herculined rockers Custom rocksliders Flowmaster 50 series car back (Ripped off and currently sitting in the back of the truck) Lightrack w/ hella 500s and KC daylighters Backup lights. Interior wise Ripped out the...
I want to make a special note with this feature truck: This is the time of year for thankfulness, and familys being together, and although Ronnie worked so hard on this truck, I want to say that we are very thankful for him and his daughter for being alive right now. There was a lot of blood sweat and tears in this truck, and it's a shame that it is no longer on the road, the truck can be replaced, but thier precious lives can't. Here's the feature "Truck of the Month" you never got Ronnie. Merry Christmas everyone, and safe hollidays! Jeff - :navajo: Engine - 4.0 SOHC w/71,000 miles - MAC Performance intake - 75MM Pro-M MAS - Apten Computer Program w 87 and 93 Octane Performance - 2 1/2" Custom...
Back
Top