Explorer Registry | Page 3 | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Explorer Registry

Here is the place to register your Explorer. List your: year, model, state, city, e-mail address and web page URL. Then people can contact you for local Explorer outings. Place photos of your Explorer here.
 
Matt Whitley Windsor, Va Specs Updated 1/13/2021 Matt Whitley Windsor/Suffolk, VA Been a member for a while,Specs on the X are listed below. Current Tires & Wheels 31x10.50r15 Firestone destination A/T Audio Pyle AfterMarket Stereo Kicker speakers in front doors 1 12" Subwoofer Planet Audio 1500 watt Amp Front Suspension TT 2" Bilstein shocks Rear Suspension 2" shackles Bilstein Shocks Front Axle 3.73 Stock gears Rear Axle 3.73 Stock gears Future Plans- 5 inch Rough Country up front SOA in rear 15x12 aero wheels and 33's 4.56 gears Lockers
Hello all my name is Frank from Orange County California and I've been visiting this forum for a couple of years now and have gotten a really good help on this site. I'm recently unemployed so I've been on here a lot more now and have been fixing things and doing some cheap mods to keep my sane in the mean time. My car is a 2003 Explorer Sport XLT, 4.0 SOHC 2wd. I bought my explorer in 09 for about 8k with only 42000 miles from the dealer. I have been in 2 fender benders since i got it, one was my fault the other wasn't so theres a couple of scratches on it but nothing too ugly. I really haven't done much to the car just a couple of body mods but will be putting on Ranchos RS5000 on all corners. I am going for the offroad look and...
Hi All, I am new to the forum and looking forward to learning from y’all! I just bought a 2017 Explorer Sport in Smoked Quartz. I also currently have a 2013 Edge Sport and a 2018 Raptor. Since bringing the Explorer home I have debadged the tailgate, blacked the remaining emblems, put on a Magnaflow catback exhaust, tuned it with an SCT 91 octane tune, and installed the second row center console. I have also done a few little things like OEM all weather floor mats, rear cargo loading protector and Redline Tuning hood struts. I am very impatiently waiting on my lowering springs and sway bar from Steeda as well as my K&N cold air intake. More to come I am sure. look forward to talking with y’all
Hello Everyone! Been on the forums for quite a while now, and have never actually made a post relating to my explorer! I've owned 2 explorers so far, bought both not running and fixed them up over time. My previous explorer was a white 99 and my current is a 97, both 5.0L and both have alot of hours and work into them, but this thread will be mainly about my current build the 97 Current Mod List (Will be updated as much as possible): -3" PA853 Daystar body lift -1.5" Torsion bar lift with adjustable rear shackles to match front -Custom built retrofit headlight housings with blue halos and switchback LEDs -20x10 Gear Alloy Armor wheels with 33x12.50 Ironman All Country M/T tires -Aftermarket Grill insert with custom Ford...
I have a 95 XLT Explorer with 193,600 miles. Everyday, I will have one to two bad startups, where the engine goes below 500 rpm then will stall out if I don’t put my foot on the gas and bring it up to about 2000 rpm where a small rattling sound can be heard which subsides. After that it will drive beautifully. Other days especially when it rains, I get the same issue more often, but during the drive noticeably less power almost like it’s struggling. Just recently did plugs, wires, coil pack, swapped out all fluids, but i cannot find the issue. I suspect It’s wiring, because oddly every few days or so, my 4wd, and 4wd low lights will flash, during which, my window switches will NOT function. Turning the car off a few times and back on...
Hey! This is my 98 Explorer! It is XLT, White, SOHC 4wd! Inherited from my father... 340k miles! As for outings... you can dm me but i am strapped on time... im around CA... I study in the LA area but... when im not in college im driving and enjoying time with my truck... I usually dont have much time but... yea! **edit i cant seem to upload photos so sry...
EDIT: I lost the pics in the older posts, but the later posts have pictures again. Specs as of 10/13 (as far as I can remember) 1992 Ford Explorer XLT 4x4 700r4 transmission using Advanced Adapters kit fl1a filter & mount re-tasked for external transmission filter 2 transmission coolers mounted in front of the a/c condenser 10" fan from a geo prism mounted on 1 cooler with Relays & a capacitor to control transmission cooler fan. Rancho RS9000 shocks (rear) Front/Rear sway bars removed BFG AT 32x11.50 on 15X8 rims Modified stock axle pivot bracket (pass side) to increase strength Extended steel braided brake lines - (had to modify stock fitting on front driver side) 4.10 Gears Detroit Locker in Rear Trac lock from Jeep Dana 35 in...
My name is Mike. I'm from Minnesota. My truck is a 98 Mountaineer. V8 and. Just over 300,000 miles. Thing I've done. New aluminum radiator, with electric fans. BFG k/2's. Autostart. Bluetooth radio. I swapped in leather seats out of a truck I parted out and squished. Has dual exhaust with t factory cats. New brakes with slotted rotors. Added the auto lamp, 8" sub, and ecc, from a donor I used for my Ranger. Sad that I have to take it off t road now. The right side of the body x member on the passenger side is rusted. Floors are still solid. The only other rust is the rockers and rear wheel arches. I bought it 5 years ago for around a thousand dollars. Ive put about 150k on it. Only failures have been the starter, alternator...
Back
Top