Recent content by blueka

Yeah if you can find them Thanks Si

I'm cool with it thanks I really appreciate your help. Si

And probably upto 2005 trac Thanks Si

4 bolts each. 2010 ranger ideally. Thanks Si

Had my nephew over to help again. Got the old springs and diff out, new stuff in, then had to stop because we ran out of daylight Si

Looking for a pair of torsion bar covers from a ranger or sport trac. Part 4 on the image. Shipped to UK please Thanks Si

Only until the weekend when we're doing the rear 😂😂😂 can't be seen in public like this Si

Had my nephew over again sunday to lend a hand as I'm still out of action and can't really do much. Got most of the front end done, brake lines, I imagine, will probably need to be replaced, still need to do sway bar/links and front driveshaft aswell as fill the front diff. But for now, back...

I had high hopes of doing loads this weekend, but I've torn my rotator cuff again and can't move my right arm, so had to enlist the help of my nephew. Managed to get the other side pretty much all bolted up. I'm probably going to have to make some new brake lines to enable me to fit new calipers...

Made some progress today, installed all new driveshafts, new lower ballpoint, and almost have the passenger side all finished. Held up by a seized brakeline fitting, and I also forgot to order a balljoint for the other side. So that should be here before next weekend. Front end is almost back...

Been a hell of a week, so progress was minimal, but, installed the new RC shocks, got the new torsion dampers on, so hopefully the entire front should be done by the end of the month. Si

Finally made a bit of progress today. It took all day but managed to get the old factory bushings out of the lower arms and get new polyurethane ones installed. Then I fought with it some more and got the arms back on Si

Also need a pair of torsion key covers if anyone has a pair from the same. Thanks Si

I did think I might have to, but I'll see how I go. I just want the damn thing on the road now. Si

Torsion bar relocation brackets are in after slight modification. My Explorer uses a different style of damper, so I had to cut the RC bracket to fit. Si