OjJR
New Member
- Joined
- March 13, 2017
- Messages
- 5
- Reaction score
- 0
- City, State
- New Orleans
- Year, Model & Trim Level
- 1999 explorer XLS
99 explorer purchased new, 200K miles, new shocks. Ride on drivers side is 32.5 inches from ground to fender well. Passenger side is 33.25 - 3/4 inch low on drivers side. Adjusted torsion bar on drivers up a full 3/4 inch and after drive to settle in the suspension, was back to 32.5 inches. (two full turns on drivers side adjustment). Anyone know the factory setting for ride height and where the measurement should be taken. I would suspect it is probably somewhere from the ground to suspension. Should two full turns of the adjustment bolt raise the level any?