Ngrimm
Member
- Joined
- October 26, 2017
- Messages
- 18
- Reaction score
- 0
- City, State
- Medford, Oregon
- Year, Model & Trim Level
- 2002 Sport Trac
Forscan shows no fault codes. There is no delay going into reverse and the transmission works perfectly once it finally goes into drive. Also it doesn't matter which forward position the shifter is in. I have checked both line and EPC pressures and they appear to be within spec and don't really change while I wait for it to engage. The delay can be up to 30 seconds when cold and as little as 5 seconds when warm. If I blip the throttle a little it will engage quicker which I assume is due to higher pressure. I don't like to do that since it jerks into gear. So I'm trying to figure out whether the problem is more likely to be caused by a valve in the valve body sticking or leaking as opposed to a piston seal etc. Any ideas? Norm