Dismiss Notice



Register Today It's free! This box will disappear once registered!

Comments on Profile Post by CDW6212R

  • Searches ExplorerForum.com
    1. JerryB2
      JerryB2
      Thanks for your input.. I probably left out some needed imfo. The vehicle I am trying to build ,at this time , has a 4.0 SOHC ,and the 4X4 TRANSFER CASE.MY DONER IS A 98 4DR. 5.0 WITH AUTOMATIC TRANS AND AWD transfer case. The transfer case I want to use is a 4406E.(ELECTRIC SHIFT) possibly from a 1998 F150. I can not find a SCHEMATIC OR ANY INFORMATION ABOUT THE WIRING.wiring s
      August 25, 2017
    2. CDW6212R
      CDW6212R
      Find the BW 4406 TOD thread by Mountaineergreen, which was a 98 302/AWD that he put the same TC in that you are hunting. The V6 trucks have the wiring already in the 4WD models. There is a different 4WD/TOD/GEM module in your truck now, than the non-4WD models. So you have the wiring already in place for the BW4406 TOD, which is in the Navigator and Expedition, of about the 97-03 range.
      August 26, 2017
      JerryB2 likes this.
    3. JerryB2
      JerryB2
      Thank you for the information. I JUST GOT A LOT OF THE SAME INFO FROM Stealthbowl. This is the most information I have had on this problem. IF I can be of any help to you let me know.
      August 26, 2017
      CDW6212R likes this.
    4. CDW6212R
      CDW6212R
      I'm glad to help. My 3rd project soon will be my 98 Limited, to begin on the exhaust and the BW4406 TOD. I'm aiming for 500hp+ in that eventually, so the weak links will be interesting to find. I will need help on the 4WD wiring, since my truck is AWD and doesn't have the basic power wires in the engine harness etc.
      August 26, 2017






    We Support Our Troops!