jammor

jammor · November 7, 2019

And I used TWO seals on the egr tube to upper plenum seal. That thing was a ***** to seal up

jammor · November 7, 2019

Replacing those gaskets fixed it. I DID replace fuel injector orings too.

jammor · June 29, 2019

Going to replace upper and lower intake manifold gaskets today, install new seals on injectors, new plugs, etc. getting p0300 and p0153

jammor · January 1, 2018

Running great. 500 miles later. Heads re-used after being planed and leak tested. No valve job. mechanic charged me $1050 parts and labor.

jammor · December 16, 2017

Truck in shop. Heads at machine shop. Waiting for diagnosis if heads are good

jammor · December 2, 2017

12/2/17 Deciding about replacing head gasket. Good compression and 7% max difference betwn cyls, Just do this right?? PLEASE ADVISE

jammor · May 29, 2017

need good kayak roof mount for 1996 expl xlt. Have two kayaks

jammor · November 20, 2016

Putting iit back together now. Rear Main Seal replaced. Hope I got that torque converter in right!!

jammor · November 14, 2016

changing Main seal, Oil pan gasket, radiator