Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. CBoug76

    A/T shift indicator showing incorrect gear?

    Does anyone know if this might be the cause of my Shift Indicator suddenly going to "L" on my 1997 Ford Explorer Sport???? it has been on "L" since Saturday morning, and hasn't moved..... Has anyone ever seen a broken cable? or just the broken clip?
  2. CBoug76

    Largest tires that will fit on a 97 explorer sport 4x4

    The 265/75R16's do fit with trimming on a STOCK SUSPENSION Explorer...At least for what the thread says... the 1997... and I assume this is correct for the following years: 1995 thru 2001...I am NOT sure about 2002 and newer.... I have a 97, and they did fit when I had them....
  3. CBoug76

    How to: Warrior Shackle Installation (pics)

    TMelton, and how does this have to do with the Shackle install??? I would suggest that you post on the forum in a better area then the Suspension area that has nothing to do with drive-train! Thanks...
  4. CBoug76

    How to: Warrior Shackle Installation (pics)

    Tom on ANY leaf spring setup... one end of the Spring NEEDS to be solidly mounted/bolted. If you put shackles on both ends, thent he readend would have room to move front to back and the drive shafts could possibly come right out.
  5. CBoug76

    How to: Fog Lights with Parking Lights

    rcomp, Can you try to use the "Check Spelling" tool??? I can't figure out what wires your talking about!!
  6. CBoug76

    How To determining the age of a tire...

    When it comes to determining the age of a tire, it is easy to identify when a tire was manufactured by reading its Tire Identification Number (often referred to as the tire’s serial number). Unlike vehicle identification numbers (VINs) and the serial numbers used on many other consumer goods...
  7. CBoug76

    Torsion Bar 101, Everything you Need to look for!

    Do you mean thread size? or do you mean what size socket/wrench works for them?
  8. TorrsionBar101a

    TorrsionBar101a

  9. TorrsionBar101

    TorrsionBar101

  10. CBoug76

    Please help, I need to make order in two days

    IF YOU GET what I said in my first post on this thread, then you'll be OK. That will be for the front bumper ONLY. The Rear Bumper brackets are the ones that need to be modified to work. They are basically flat plates that need some new holes drilled. thats all....
  11. CBoug76

    Where to Buy an Injector?

    I have attached a photo of my Injector. The newer injectors are different then what you mention as a "red top"....
  12. CBoug76

    Where to Buy an Injector?

    Yes I am... When they cost anywhere from $50 to $75 each.... and I can barley afford 1, let alone 6.... I am only going to replace one.....
  13. CBoug76

    Where to Buy an Injector?

    Help.... I am looking for a place to buy an Injector...... 1997 Explorer Sport, 4.0L OHV Engine, 8th vin: "X" The Injector is RED..... Anybody know where a good place on-line to go for them, that is reasonablaly priced? BTW Stay away from Auction Frontier on E-bay....
  14. CBoug76

    ABS Light comes on @ 75mph

    Ok, When I get my truck up to 75mph, the ABS light comes on, and stays on... Untill I cycle the Key. As long as I stay under 75mph the light stays off.... anybody have any idea what this problem is? and How I can fix it?
  15. CBoug76

    Torsion Bar 101, Everything you Need to look for!

    There is no write up, just 2 pictures that are pretty much self explanitry(SP)......
  16. CBoug76

    New Year's run Dec. 31/Jan 1, '04-PA???

    OK, I was asked to do something here...... I have read this thread, and I am asking that this thread Be only what the Subect of it is, be about! (New Year's run Dec. 31/Jan 1, '04-PA??? ) PM's and E-mail's and Phone calls are for the rest of the BS that has been going. Stop the BS, or...
  17. CBoug76

    Torsion Bar 101, Everything you Need to look for!

    Do a search on the Forum on how to install the Shackles and twist the torrsion bars...
  18. CBoug76

    Hi-Lift Jack Modification - By CBoug76

    Oh Ok.... But Still I am Right when I say that the Pins that I have changed do NOT affect the safety features of the Jack.
  19. CBoug76

    Hi-Lift Jack Modification - By CBoug76

    Bump for the New people here.
  20. CBoug76

    anyone mount an ac compressor to use as air compressor?

    thats the only way to be sure, to look at the shaft end....
  21. CBoug76

    anyone mount an ac compressor to use as air compressor?

    you must have the newer york's the older ones can do up to 10 cfm! but they are larger in size. That is the one I will be fitting under my hood when the time comes.... I already have my manifold built, my tank, 2 Hose's(1 to chop and use, and 1 to use at all the quick disconnects). I Don't...
Back
Top