Search results | Ford Explorer Forums - Serious Explorations
  • Performance Upgrades - Maintenance - Modifications - Problem Solving - Off-Road - Street Trucks.
    Covering the Explorer, ST, Sport, Lincoln Aviator, Sport Trac,
    Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Aerostar.
    Featuring H.I. - Human Intelligence.

    Register Today It's free!

Search results

  1. W

    Harmonic Balancer Removal

    Yes, I made up that long flat plate with three holes in it, two holes were for short bolts to mount it to the old harmonic balancer so the crank would not spin and the large center hole about 1.5 inches is where the socket went in to back out the 12 mm crank bolt with a ratchet extension. A...
  2. W

    Harmonic balancer failure

    Thanks to zjrog I just went through this entire process on my 2005 4.0 explorer and thanks to zjrog experiences, I went a different route to remove and re-torque the harmonic balancer bolt. At the local ACE, I bought a piece of 3 inch by 1/8 th thick by 3 foot long flat stock and drilled an 1.5...
  3. W

    Harmonic Balancer Removal

    Thanks to ZJrog I just went through this entire process on my 2005 4.0 explorer and thanks to zjrog experiences, I went a different route to remove and re-torque the harmonic balancer bolt. At the local ACE, I bought a piece of 3 inch by 1/8 th thick by 3 foot long flat stock and drilled an...
Back
Top