Search results

I have an 05 EB 4.6. I replaced the steering rack and hoses, but cant find where the bracket gets connected to. Theres one thats bolted on the passenger side in the middle of the "U" shaped part, and there was another bracket closer to where it goes into the rack, which is the one Im referring...

So I put my battery in today after 4 or so months of the truck sitting while I replaced every suspension and brake part all the way around. I felt like I was almost to the finish line, battery was put in in preparation of bleeding the brakes. Got some fluid to all 4 corners, awesome. Didnt see...

Whats the proper procedure to priming and bleeding new lines and calipers? System was run dry except the residual fluid, and using the old MC and HCU/ABS module. I know Ill probably have to have that bled to, but Ill go have that done once its primed and at least has fluid in it, thanks

I have an 05 Eddie Bauer. Replacing all brake lines from HCU back. I already threw out the lines from the hcu to the bracket like a dummy because I ordered a full set of preformed lines that I thought would include all 4 of those lines, not knowing that most explorers have 3. Well now I need the...

Anyone know the part number for this bolt in my 05 EB 4.6? Is it the same for the front bolt? Ive got the front bolt out, and the shock bolt, that rear one seems to be seized and Ill be cutting it out. The only part number I can find is W707363-S436 but I cant seem to find a way to verify that...

Hoping for some help here. I have a 2005 EB with the 4.6, I ordered a kit that is supposed to replace every brake line front and rear, an 11 piece kit from InlineTube.com. When it got here theres only 3 short lines, the ones that come out of the ABS module, I have 4 coming out. Am I missing...

05 Eddie Bauer 4.6. So I took my tank out to replace pump, cleaned the tank, then set it on it end to drain, fill hole side down with a screwdriver to hold it open. Put it all back together and go to get some gas in it and now it wont take gas. Pulled hose by filler and tried to blow, couldnt do...

So Ill try to keep this as short as possible. My daughter has an 04 Explorer with the 4.0, she went and bought a new car so the truck was parked near the beginning of winter, ran fine with no issues at that point. Her younger sister is getting her license so she decided shed give her younger...

Was moving around with my steering, one of the hooks broke off after I replaced the upper control arm, anyone know where I can get one? Thanks

Truck ran fine, then I changed the rear brakes, rear abs sensor, fuel filter, and new plugs and wires, first trip out and its overheating fast. WTF could have happened now. No leaks or anything I can see. Once its shut off of course I can hear all the gurgling... Any ideas? Forgot to mention...

but couldnt find a good answer, in fact, theres so many I may as well not even have searched, a little overwhelming lol. Heres my question.. 99 Mounty, all stock. Theres a hole in the muffler and where it meets the passenger side pipe weld. I wouldnt mind a little deeper tone, but Im mainly...

So after 7 hours under the truck trying to replace the gas tank due to the nub thing that the filler neck hose fits on to rusting off, Im totally fed up with this thing. So many busted knuckles and bleeding from multiple spots. Took 7 HOURS to get the filler neck out, which had rusted screws and...

My ABS light is on and my speedo intermittently works all the time. Shows right speed then drops to 0, on and off, the whole Im driving. So, I ordered a VSS PN sn7142, crawl up under the truck, which is a 99 Mountaineer 4wd with 4.0, anyway, takes me 3 hrs to get the vss out because the PO had...

Ive searched the forum, searched the internet, and I cant find anything even close that explains this noise. We just bought a 99 Mountaineer and it has a clunk or thump in the rear somewhere. Had it on a lift and everything looked ok as far as connections, nothing broken etc. So far Ive greased...