Search results

I'll second that. Clean up the mount flange and bolt it back onto the coil pack that it shares the loom with. You won't notice any drivability issues but it reduces RFI in the electronics systems.

Take a picture of your remote and post it. I'm curious, it doesn't sound like a factory installed system.

That's exactly what I was looking for, thanks! Im off to find a 95 or 96. Is that plastic window tinted or does it have a color film on it, do you know?

All of these older explorers used vacuum florescent displays and you have to physically modify displays to get the color you desire... In shades of blue and green of course. To change the color of the instrument cluster meant opening it up, doing some delicate sanding and installing the desired...

look at the picture in this link. https://www.therangerstation.com/forums/index.php?attachments/img_2037-jpg.19553/ Disconnect the orange\white and the orange\black wires if they are present and this will fix your dash light problems. Every wire on your 1771 adapter should have a corresponding...

I am working on installing an explorer overhead console into a ford escort. The one I have has green colored display on it. My wife wants to change the instrument cluster colors to blue, does anyone on here know what years had the blue clusters and instruments vs the green ones? Google isnt...

Here ya go.... https://drive.google.com/file/d/0B_XiNEifkxUpZWhQZ0djT3VsVVU/view?usp=drivesdk

The password is always changing. I personally use this one; Username: c3687625 Password: password

I also found this one. There is a website I found that has a list of them: Username: c3687625 Password: password

it looks it looks like they changed it all up again Bob

it sounds it sounds like you have a bad remote, pop open the battery compartment and clean the contacts. Make sure there's anything inside that's touching the center button for the panic when you're hitting the lock button

To my knowledge, they changed the location for the 99MY

If nothing happens with your key for programming mode it will be easiest to install an aftermarket system. They sell around here for about $99 installed, often less. Not a difficult diy task but it is tedious locating wires under the dash. Might pull the panel and see if the wiring for a factory...

If nothing happens with your key for programming mode it will be easiest to install an aftermarket system. They sell around here for about $99 installed, often less. Not a difficult diy task but it is tedious locating wires under the dash. Might pull the panel and see if the wiring for a...

I've been searching everywhere for the last two days short of going to a wrecking yard. Does anyone know the part number for the RAP Module in 1997 and older trucks? Aldive did a write-up years ago and included the part number for the 1998 and up module, but I cant find toe number for the older...

Contact bobflood on here and he can help you out with a wiring diagram. The wire color should be either light blue with a red stripe or red with a black stripe. Both colors were used at different times

the interior lights on this truck have two separate circuits coming from the dimmer. one circuit controls the cluster and door switch lights, the other controls the OHC and Radio brightness. when the headlight switch is turned off, the dimmer wire to the OHC is 12volts and the dimmer is...

That one doesn't seem to work anymore either

Sounds like the chain broke

Turning with steering, Or while driving?. If your front axle is locking up in one or both directions, you likely busted the chain

There are only two ways to change the default door code. The first is to replace the raps or Pats module, but doing that means reprogramming all of your keys and key fobs. The second way it to open the module up and change the locations of the resistors that connect to the number pad. This...

Yes it was. Thanks.

Bobflood, is the link above still active? Keeps giving game an error message.

Silly question, but did you re program the new key fob to your truck?