Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. C

    Overland, backroad, offroad park- Gen 2 Explorer -trying something different

    Normally I go all out for offroad, rock crawling, usually trailer rigs. That said.. I'm going a different route. I bought a 2000 Eddie Bauer V8 a couple years ago as a one owner from AZ, with around 55,000 miles and no Midwest Rust!! Currently it has around 88,x.. miles, so still a baby...
  2. C

    2000 4DR 67in Trail Gear Rock sliders installed

    I have a 00 Explorer 5.0, 1in Body lift, ad a leaf, TT, 265-75-16 BFG KO2 Allterrains, I added factory gas tank skid, RCI front radiator skid, still looking for T-case skid, have done 4406 swap, and now it was time for sliders! I have a welder and no issues with welding them on, I don't have...
  3. C

    Buggy kinda... 94 Explorer Sport

    Traded my Jeep I built for few things, and I ended up with a 94 Sport I modded in the past for a friend. Currently has trashed body, 4.0 5spd, TTB 4.56s, Powertrax front, 8.8 Artec trussed rear. Gunna be parting out Suspension and axles after New years. Missouri-no shipping... :) Anyway...
  4. C

    Changing fluid in Auto on 2000 V8 AWD, where did this piece come from?? In pan

    Changing fluids in my wife's new Explorer. Dropped tranny pan, 2000 V8 AWD, likely has never been changed?? has 65xxx miles. This little guy was in pan fluid and not sure where he came from. Been awhile since I had one open and do not remember. Pics in min
  5. C

    Mommas new ride

    Excited about getting a Super Clean Arizona 2nd Gen 5.0 AWD Eddie Bauer. Only pic I"m gunna post for now. Once it shows up on car transport will post more. 1 Owner , with 64xxx miles. Plans- stay stock for momma and babies. If they out grow it down road- then it's mine for the modding.
  6. C

    4406 TCase swap kit, 95-01 V8 awd Explorers

    I have 4406 New shift Lever setup Front & rear driveshaft needed. This is excellent way to gain MPG and 4low for trail riding. All works great- check out my headers Forsale also. No shipping Pick up in Linn, MO or St. Joseph, MO can meet somewhere between the 2. Travel I/29, 435, I70...
  7. C

    Torque Monster Explorer 5.0 Headers **New**

    *************SOLD******************** I have a set of Torque Monster non EGR headers for 96 Explorer 5.0 New never used. If you have a newer EGR engine just do an EGR block off and remove it. Price is $700 firm no wait to get them- if you can even get them anymore? + shipping Paypal...
  8. C

    Excellent FW SAS axles in Northwest Missouri

    I have High Pinion Dana 44 from 76 F-150, has 3.50 gears, weld on wedges which can be removed for 3 and 4 link setups, or inward for sas swaps. matching 9in rear same truck, selling in set will not split. Located St. Joseph, Mo. These axles are ideal for half ton setups, 1/2 axle tubes, 5 lug...
  9. C

    Anyone around St. Joseph, Mo? Trails, private land get togethers?

    I will be moving to St. Joseph, Mo. I'm looking to find some other people wheeling locally, I can assist with trail cutting and clean up if you have private land. PM me for more info if you don't want to post your location. I also can help with about any aspect of offroad vehicle build up...
  10. C

    91 4Dr EX 5spd, M-Tcase- $800 in Arizona

    So, I have realized shipping is not feasible for me, but for all you lucky local or even several hour away folks, someone is going to get a deal. ****If you buy this cause you found this post, feel free to contact me, i would love a $20 gift card or something to Chilis, Outback? lol just...
  11. C

    6inch lift TTB coils

    Looking for 5-6in lift Duff or Skyjacker, Explorer Ranger TTB coils, little bummed cause I sold a set recently and now need some back. :thumbdwn: Let me know if you have any. Thanks.
  12. C

    Narrowing 86 Ford KPin 60 for Jeep, but should be very simialr for RBV. How To

    So, I had searched alot about this and I have found several threads, but not the photos I wanted and for my application. So here is my Dana 60 install. My Jeep is 97 Wrangler ***But I have had several RBVs and think this would be very very simialar on another RBV**** -I'm building a...
  13. C

    Leftover parts, my retired racer into crawler. Sport/Chopped

    This Explorer has quite the story! It all started as a stock as they always do, but had been rolled over. It still ran great and we could see the potential. My brother bought it from another Explorer fanatic that had plans for it, but just didn't have the time. I had developed a taste for local...
  14. C

    Anyone running 33in Pitbull Rocker Bias Ply?

    Any one running Pitbull Rocker Bias ply tires, on an Explorer. Just curious thoughts of them vs previous offroad tires you have had. I have had Boggers, Swamper LTBs, Pro Comp Extreme Mud terrain 2s, Mickey Thompson MTZs, KM2s. I'm hoping to hit some mud, but do alot of trails. Just...
  15. C

    1st Gen Explorer Factory Sunroof Cover Bag

    My brother was cleaning out his garage and told me to sell this, he thought might be kinda rare or hard to find these. He said it was in a 1st gen explorer with factory sunroof. It's a bag to put the sunroof glass in. $100 might be worth more or less, I havent looked into it yet.. Nice for...
  16. C

    April 20th, day trip to Potawatomi in Fulton, MO

    I think myself and few friends are heading to Potowami offroad park in Fulton on Saturday April 20th if anyone wants to join fun park for day trip and we are taking are quads also. *We might camp saturday night for night run, but unsure* **This park has some technical stuff but alot of good...
  17. C

    Skyjacket TTB 4-6in drop bracket, center bracket pass TTB side & extreme drop pitman

    Cleaning out garage just bought a truck for parts that I actually bought this bracket new and sold to the guy about 1-2 years ago, he really didnt use the truck much which is why I bought the whole truck back. Any way I have the Good Skyjacker 4 or 6in TTB drop bracket that bolts under the...
  18. C

    79 Ford Dana 60 Front axle, New Artec Hi steer.

    Decided Gunna keep a little longer, not forsale.
  19. C

    E-150 rear tank/hose/pump for rear tank in explorer- Missouri

    I have filler hose I think was bronco2? An E 150 tank I bought new less than year ago, with new pump. I will also throw in the straps. Great tank to put in back of explorer. This will require some modifactions to install is not bolt in with no mods. Downfall no shipping but if you're in...
  20. C

    4406 Shifter Linkage and Boot

    ******SOLD*************** I have stock 4406 shifter linkage and boot, pic shows tranny which is not included. $100 + shipping. This is all from a 97 F150
  21. C

    Christmas Special only, V8 guys--5spd/4406 swap kit

    **********Price dropped to $500**************** So, i've been holding onto these parts with some ideas, but if someone wants to buy them soon. I might let them go for this steal of a deal. If you have Explorer 5.0 this will work for you. I have the 5spd from 97 F150 4.2 4x4, 3x,x.....
  22. C

    Race truck to 1 ton crawler explorer build

    Check out Registry, full details: http://www.explorerforum.com/forums/showthread.php?t=384732 As always plans change for me and I decided that I want to build a more hardcore trail rig then any other I have had yet, but try to keep cost not terrible LOL. So gunna use my tuff truck...
  23. C

    Dash bezel from 97 Explorer. $30 shipped

    I have dash bezel from my 97 explorer good shape. $30 shipped
  24. C

    Wildhorse Hi Flow 5.0 Power steering pump. $65 shipped

    I have Wild horse Hi flow pump and line needed for Explorer 5.0 and hooking line into Gen 1 style steering Box. $65 shipped.
  25. C

    97 explorer airbags and module $50 shipped

    I have Black color driverside bag and grey passenger side, with blue control module box from a 97 Explorer. $50 shipped. Lower 48
Back
Top