fuel rail | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

fuel rail

  1. M

    fuel rail removal in reinstall help 2005 4.6

    How do I remove the fuel rail? Currently replacing the intake manifold and am puzzled by how to remove it on both sides.
  2. M

    I need help locating part number (Fuel Rail)

    Hello - I have a leak coming from the part in the circle. I have currently added some clamps to stop the leak but still would like to replace the part. I am unable to find the part number or where to get it (I would prefer to get it new than one off of ebay) - anyone know?
  3. K

    Difficulty removing Fuel Injectors (Images)

    What's up guys, it's been a while since I've posted. I recently had to replace my alternator and since I was under the hood and I had a vacuum leak in my upper intake manifold I decided to change it out for a new one. Needless to say one thing lead to another and since I had the upper intake...
  4. P

    URGENT Sport Trac Injector Removal

    Evening everyone, I have a 2001 Ford Sport Trac 4.0 SOHC that has a bad fuel injector on cylinder two. Has been misfiring so I checked the resistance, other injectors have sixteen, number two has nothing. I have been looking and havn't found any good information on how to change the injectors...
  5. T

    obsolete fuel pressure regulator 98 explorer sohc

    I have a 98 explorer xlt 4.0 sohc vin E. the fuel pressure regulator is shot and the part has long been discontinued. It has the steel braided hose crimped to the regulator. I am wondering if anyone has any success of finding a crossover p/n that would work. Or my second thought would be to...
  6. M

    no pressure at fuel rail

    I have a working fuel pump, new fuel filter, new fuel pressure regulator and no pressure at the shraeder valve. I can hear the fuel pump run when I turn on the key (3-5 seconds), but no pressure at the shraeder valve, any ideas? Had been running, started running rough when trying to...
  7. O

    How to: R+R lower intake

    This is a writeup on replacing the intake gaskets, injector O-rings, fuel pressure regulator, valve cover gaskets and plugs on a 91-94 4.0 v6. Later models would not be much different. Im not going into great detail but covering the basics so you can tackle this yourself. I recommend using the...
  8. G

    Fuel leak @ supply to fuel rail

    Well, fresh from replacing my fuel pump, fuel relay, EEC relay, and my ECU, my Explorer actually started and ran for the first time in about a year and a half! BUT... After rejoicing and letting it purr for about 2-3 minutes while I moved my Fusion from behind it, there had been a fuel leak...
Back
Top