Dismiss Notice



Register Today It's free! This box will disappear once registered!

'92 Ford Explorer. Fan clutch replacement.

Discussion in 'Stock 1991 - 1994 Explorers' started by Candy.Kane86, October 21, 2010.


  • Searches ExplorerForum.com
    1. Candy.Kane86

      Candy.Kane86 New Member

      Joined:
      October 21, 2010
      Messages:
      1
      Likes Received:
      0
      Trophy Points:
      0
      I need help trying to replace my fan clutch for my 1992 Ford Explorer. I have to removal tool but not too sure where to go from there
       
    2. Support EF

      Join the Elite Explorers for $20

      Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself, and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments directly to your posts and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


      to hide adverts.
    3. BrooklynBay

      BrooklynBay Moderator & long time member. Staff Member Moderator Elite Explorer

      Joined:
      November 11, 2005
      Messages:
      51,590
      Likes Received:
      76
      Trophy Points:
      78
      City, State:
      Brooklyn, NY
      Year, Model & Trim Level:
      88 89 93 95 96 Aerostars
    4. trush1492

      trush1492 Member

      Joined:
      October 18, 2010
      Messages:
      83
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Harrisonburg, VA
      Year, Model & Trim Level:
      92 XLT
      Start by removing the air intake and radiator. Should be pretty self explanatory from there.
       
    5. huntman58

      huntman58 Active Member

      Joined:
      February 13, 2007
      Messages:
      723
      Likes Received:
      1
      Trophy Points:
      0
      City, State:
      Fremont calif.
      Year, Model & Trim Level:
      2013 Dodge Advenger
      No need to remove the radiator if you’re careful.
      Just did that job as part of another one so let me try to list them. Also a manual like Chilton’s or such is a good thing to also have but here it gos.

      1) Disconnect Battery neg cable for safety sake
      2) Remove air intake tube.
      3) Remove fan and fan clutch (to remove from truck you will also have to remove the two bolts that hold the fan shroud on. Once they are removed then left the fan, clutch and shroud together the fan and clutch will still be bolted together by the way)
      4) Unbolt fan from fan clutch
      5) Check fan for creaks and chips around its center hub and blades
      6) Install is just the reversal
      7) Being the battery was disconnected it’s also a good time to clean the MAF sensor just a thought.

      There is no need to remove or loosen the fan belt when doing this job same with removing the radiator but if you want you can remove the radiator to give your self extra room but it is not needed just be careful and you will make less work for your self.
      good luck its an easy job just remember the fan is normally a left hand threaded item just check your fan shroud as it will tell you on it what you have. If you get stuck just come back and ask
       

    Share This Page








    We Support Our Troops!