99ex22 Is Crazy!

I know a lot of you probably think im crazy for lifting my explorer then lowering it back down to stock then lowering it which I didnt get any pictures of because I only had it like that for a couple weeks. WELL.....
I lifted it again! Same old setup, 1" Body Lift, Shackles, And TT except now I'm running 33x12.5 BFG All Terrains mounted on 15x8 Allied Daytona 51 steel wheels with 3.75 back spacing. EDIT: 4/13/2011 Went spring over axle in the rear and sloped body lift

Mods:
2" TT
SOA
Sloped BL
33x12.5 r15 BFG A/T's
15x8 3.75 backspacing allied daytona 51 wheel
Tow hooks up front
Hella 500's
Trailer Hitch
Mac Intake
Cat back magnaflow
Cobra cb with 2ft fiberglass antenna
JVC hd radio deck
Clear corners
Painted eddie bauer trim black

Records:Purchased 08/28/2009 With 109,000 Miles-Im the 3rd owner
09/04/2009 New front brake shoes and rotors
09/04/2009 Motorcraft Plugs & Wires
09/11/2009 Flushed out Coolant
09/18/2009 Royal Purple Synthetic Fluids
09/24/2009 Seafoam Treatment
04/19/2010 Replaced Outer Tie Rods and installed camber adjusters
01/02/2011 Replaced Upper Control Arms/Ball Joints
06/10/2011 Motorcraft Plugs & Wires
06/10/2011 Flushed out coolant
06/10/2011 Motorcraft fuel filter

Stock and after me spending half the day detailing it-

1" body lift, shackles, AAL, and TT-

4406 Manual T-Case going in-

Painted eddie bauer trim black, 5.0 emblems, and installed a 95-98 steel bumper-

Went spring over axle in the rear and sloped body lift-

Flex test-

Lots more pictures on the other pages of the thread

 

[Big_DP]

Sorry but as soon as I saw your rig I thought of doing this..

don't know why, just one of those things that click

 

[99ex22]

I painted the gold trim black, got a hitch, and installed a 95-98 steel front bumper. These are a bunch of random photo's taken in the last few weeks from some wheelin/shooting trips...

Testing out the new hidden hitch...

Me and the rig...

 

[rynodog]

black trim black wheels, looks great

 

[EK98]

Did you paint the trim yourself? Looks great! Can you fit a full size spare with the hidden hitch?

Where were you wheeling at in those pics?

 

[99ex22]

Yeah a 33" should still fit under it but I can't say for sure because I don't have one. The wheeling pictures were taken at Goat mountain near estacada

 

[97xlt4.0]

Lookin great!!

 

[99ex22]

Thanks guys! i'm trying to figure out a pinging issue now....

 

[Sams01XplrSprt]

looks bad ass keep up good work

 

[99ex22]

I think I narrowed it down to the MAF or the IAC smells a little rich too. I guess ill clean them up later!...Again

 

[99ex22]

Hmmmmmmmm What's Russ's New Project for the weekend???....:

 

[99ex22]

drivers side soa done

All done

A little raked

Waiting on a 3" body lift spacer to come in the mail so hopefully by tuesday ill have it level!

Edit: just tracked it and it will be here on Wed.

 

[99ex22]

Trying to figure out what to do with the trac bars....Im thinking about maybe relocating the brackets on the frame closer to the axle?

Any ideas?

 

[99SportX]

Hey man, that thing is looking good! How are you going to level it with the SOA? Are you doing the sloped body lift like you had on your old explorer?

Just out of curiosity, what tire pressure do you run with the 33's? I have those same tires and I am not exactly sure what I should be running on the street. The tread is not exactly flat when on a 15x8 wheel.

 

[99ex22]

yeah sloped BL. I run 40 PSI on the road and 20psi off road.

If anyone has any sugggestions on the trac bars that would be great!

 

[mounty71]

I'm trying to figure out how to reuse my stock traction bars right now too, but I'm still spring under. Check out the Autofab 2 link. I think that since you're spring over now, the traction bars should be mounted on the bottom of the axle. If you keep them mounted on top of the axle, they won't be doing anything. Same with the mounts for the frame...I think they need to be relocated underneath the spring mounts or else they will just bind as soon as you get some articulation.

 

[99ex22]

autofab 2 link?

 

[mounty71]

http://www.autofab.com/16rear1.htm

 

[99ex22]

i think they would still work if they were on top....it would still keep the axle from pulling under load.

 

[mounty71]

Not really. The axle wants to pivot on the spring pads, and the point of traction bars is to eliminate that. The stock traction bar mounts on the axle are very close to your new spring pads above the axle, so by mounting them there they won't be effective. Think about it, the farther away from the center pins they are, the more effective they will be at eliminating axle wrap. What you might be able to do is, instead of relocating the traction bars entirely below the spring and axle like the autofab kit does, keep the mounts somewhere on the frame (maybe still relocate them though) and weld on some new mounts that sit higher off the top of the axle than the stock mounts, so you will be increasing the distance between the spring pads and the traction bar mount.

 

[mounty71]

i think they would still work if they were on top....it would still keep the axle from pulling under load.

Wait, are you referring to the axle mounts or the frame mounts?