Dismiss Notice

Register Today It's free! This box will disappear once registered!

bad miss/bogging problem

Discussion in 'Under the Hood' started by scsr_11, October 21, 2009.

  • Searches ExplorerForum.com
    1. scsr_11

      scsr_11 New Member

      September 9, 2009
      Likes Received:
      Trophy Points:
      City, State:
      Fort Oglethorpe, GA
      Year, Model & Trim Level:
      1993 XLT
      1993 Eddie Bauer 4.0 4 door

      I've been searching for a REALLY bad miss/bogging problem for a couple weeks. I replaced plugs, plug wires, vacuum lines, fuel filter and even put a ground strap on the firewall that the previous motor swapper didn't do. Problem still persisted.

      I finally figured out how to read the codes via the CEL. The CEL had been going off on me while driving and especially when the X would barely pull a hill. I had the battery unhooked so the Continuous Memory codes were probably cleared but I was gonna check anyway, and then drive it and set the CEL off again. On Demand = 111 Continuous = 111 KOER = 172

      HOWEVER, after simply running the KOEO and KOER test, the truck now purs! Plenty of power. No miss or bog.
    2. Support EF

      Join the Elite Explorers for $20

      Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself, and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments directly to your posts and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.

      to hide adverts.

    Share This Page

    We Support Our Troops!