Chris 1991 Eddie Bauer

Lowered 3 inches front and back
95 ranger rims black
Air dam
Headlights side markers and modified reflectors
Tint strip
Mp3 toutchscreen 2 twelves and a ten
led lights in gauges and everywhere
Small ish new tires to go with drop
hours of polishing and buffing painting on stock paint
Lompoc california
Lom

 

[Maniak]

How'd you do the lowering? Is it just blocks in the rear and drop beams up front or did you need shorter/cut springs up front.

Being in the lifted crowd I don't get to see much lowered stuff.. but it still interests me..

~Mark

 

[1991 sploder]

yea It is a 3 inch lowering block in the rear only paid 25 bucks for the kit from kragen
up front is just coil spring compressors ( u bolts from home depot)
cut bumpstops down 1.5" in front
to lower it only cost around 40 bucks
stock paid 1200 for the truck
Would cut springs but they would not seat properly and new ones are hard to find was considering a coil bucket relocation 3 inches higher but was not sure how it would effect spring rate.
simple and I like having the camber just a little off because it looks cool lol