delexploder's "Vader" 97 v8 sport | Page 2 | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

delexploder's "Vader" 97 v8 sport

Thought id go ahead and finally get this going now that my rig is functional, I started out with my 97 4.0 sohc sport. I bought it in 05 from its original owner with I think around 183,000 miles, I drove it and did small upgrades like autodimming rear view, new pioneer speakers, Monroe coil overs, 99 front bumper and fear hatch, I also did the usual maintainance like upper and lower balljoints ( motorcraft) swaybar links and bushings ( energy suspension) rebuilt rear, tranny rebuild, ect...then I finally started getting the death rattle from the sohc timing parts around 240,000 miles so i started gathering parts for my v8 swap, do not do what I did if you want to do this swap! Get a whole donner vehical, so it was at this point that I came here and that's when i learned (with the help of alot of members) about PATS, anyway that made me rethink and redo most of my work and replace alot of parts , I just finally got it on the road after swapping out the tranny, so now I feel like I can post my elite registry ,I still have a long way to go to get it where I want but i now think im at a good starting point;)
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





lift

Ohhhh, on the lift to be worked on. I get it now.
Let us know if you have an increase in fuel mileage.
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Yea that would be nice especially in the mounty, I mainly like the prospect of driving either in true 2wd on the streets
 






Ups just dropped off all four unibearings today! And after having no luck finding the knuckle seats and sirclips local I ended up getting the seats national part number 710519 from rock auto around $24 each then I found the sirclips Ford F872-3B457-AA on ebay from Tasca Ford for $23 each, now I just gotta get the u joints for the front driveshaft and I can start
 






nice explorer u got there
 






IMG_20140219_093301_372.jpg
IMG_20140219_093325_644.jpg
nice explorer u got there

Thanks, got the new shoes on the mounty yesterday , my usual 31x10.5 BFG ATs
 






Hot dam! Fed ex just dropped off all four half shafts, and the seats and clips should be here today or tomorrow, bad news is the manual 4406 I had at the shop grew legs, so now I have to find another one and the driveshafts for the mounty
 






IMG_20140219_142810_767.jpg
IMG_20140219_142819_249.jpg
Here's a few pics of the knuckle seats ,
 






I did that same mod to my Mounty. I love it, true 2wd with a manual t-case! You'll like it a lot. I've had those AVM hubs on mine for a couple of years now with zero issues. They're fine for all but the most hardcore wheeling.
 






IMG_20140220_130153_423.jpg
Clips just showed up,
 






I always keep at least 2 of those on hand. My local Ford dealer gets them for me but they're not usually in stock so I don't have them for a couple of days. I got caught once without them when I had to dig into the front end, and I said never again! I see you bought extras as well.
 






Not extras, im doing my v8 sport and my mounty, I do plan on getting some, Im already pissing my wife off with how much I've spent so extras will have to wait, I just keep telling her she will love it when im done,
 






Gotcha. I've got 1 of those as well(wife, that is) so I know where you're coming from. lol!
 






IMG_20140224_103941_620.jpg
Got my u joints $16.28 each, Moog 353 for the front shaft to diff , and I have drive shafts on the way and as soon as I get a shipping cost my manual 4406 will be on its way.
 






Driveshafts just showed up, and a manual 4406 with shifter and all is on its way, once its here I'll be doing the AVMs and t-case swap on the mountaineer first, then once the wife is out of my hair I'll jump back on Vader, but I'll try to document both in here with more pics
 






IMG_20140226_134554_455.jpg
Here is the rear shaft
 






IMG_20140304_122744_736.jpg
IMG_20140304_122632_781.jpg
IMG_20140304_122542_684.jpg

UPS just dropped off the manual 4406
 






IMG_20140316_182635_205.jpg
IMG_20140316_182655_881.jpg
Kinda waiting for the weather to make up its mind before I start , 70 degrees yesterday and a blizzard tonight , I did however get one last part, its from a 98 f-350 we junked months ago,
 






Its for the mounty so im probably gonna paint the plastic grey to match the interior, it has two cigarette burns in the top of the boot ,I have fixed this before in other rigs with a little black rtv and a popsicle stick, it was free so I dont mind
 






IMG_20140322_120233_183.jpg
IMG_20140322_142024_310.jpg
IMG_20140322_142613_158.jpg
IMG_20140322_150341_856.jpg
IMG_20140322_170854_432.jpg
Just a little update , got the AVM hubs installed on the mountaineer today , hopefully I'll get the 4406 swap done tomorrow
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Hubs

Looks awesome!
 






Back
Top