After researching here I found out that the code to the door is on the key pad module located in the piller behind the rear passenger door. Well today I got some time so thought Id try it. Step 1 - fold the rear passesnger seat Step 2 - pull the rubber seal out (rear upper section only) Step 3 - The upper panel where the seat belt adjuster is can be easily pried out, you'll see the clips after you remove the rubber weather stripping Step 4 - There is a clip on the lower part of this panel that can be easily popped out Step 5 - Now you can pry easily on the lower panel, you'll see the module when you look down inside after prying open the upper panel. Step 6 - I used a small mirror, and found a 5 digit number on the black module box. The white sticker has black text and is is facing the drivers side so without a mirror you'd really need to get the lower panel loosened to pry it out more. It was easy - 5 mins tops. Step 7 snap everything back together - no tools required - except the mirror.