Dismiss Notice



Register Today It's free! This box will disappear once registered!

Found my keyless entry code, how to reprogram it to a new code?

Discussion in '2001-2005 Explorer Sport Trac' started by woogyboogy, June 17, 2010.


  • Searches ExplorerForum.com
    1. woogyboogy

      woogyboogy New Member

      Joined:
      May 19, 2010
      Messages:
      43
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Southwest FL
      So I have a 2004 Sport Trac XLT, and I decided to go ahead and remove the defroster panel, found my code, typed it in and was successful. My only question now is, how do you reset the code so I can come up with my own code? Thanks everyone!!!
       
    2. Support EF

      Join the Elite Explorers for $20

      Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself, and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments directly to your posts and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


      to hide adverts.
    3. my pos mounty

      my pos mounty Well-Known Member

      Joined:
      September 15, 2009
      Messages:
      1,812
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Land of Corruption
      Year, Model & Trim Level:
      06 F-350
      This won't really answer your question, but keep in mind that the original code can not be deleted. Don't share that code with anyone. You can program other codes that you can delete later, so if you give a code to someone else, give them a code you added instead of the original code. Just in case at some time in the future, you do not want that individual gaining access to your truck.

      As for programming a new code, that should be in your owners manual.
       
    4. GAZH13

      GAZH13 New Member

      Joined:
      March 21, 2010
      Messages:
      40
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Grand Bay, Alabama
      Year, Model & Trim Level:
      2001 Sport Trac
      Programming your own personal entry code
      1. Enter the factory-set code (keypad will illuminate when pressed).
      2. Press the 1/2 control within five
      seconds of step 1.
      3. Enter your personal 5 digit code.
      Enter each digit within five seconds
      of the previous one.
      Do not set a code that includes five of the same number or presents
      them in sequential order. Thieves can easily figure out these types of
      codes.
      Your personal code does not replace the permanent code that the
      dealership gave you. You can use either code to unlock your vehicle. If a
      second personal code is entered, the module will erase the first personal
      code in favor of the new code.
      If you wish to erase your personal code, use the following instructions:
      Erasing personal code
      1. Enter the factory-set code.
      2. Press and hold 1/2 for two
      seconds within five seconds of
      step 1.
      The system will now only respond
      to the factory-set code.
       
    5. woogyboogy

      woogyboogy New Member

      Joined:
      May 19, 2010
      Messages:
      43
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Southwest FL
      ok thank you so much guys, I got it!
       

    Share This Page







    We Support Our Troops!