Russgoni
New Member
- Joined
- April 2, 2017
- Messages
- 1
- Reaction score
- 0
- City, State
- Middletown, CT
- Year, Model & Trim Level
- 2002 Ranger XLT
Hello,
The oil pressure sender on my Ranger was bad so I replaced it. Unfortunately before I unplugged the wire to the sender I forgot to disconnect the battery. So now when I start up the truck the gauge needle is under the "low" reading and will not rise above it due to the guide. Is there anything I can do to fix this or am I screwed?
The oil pressure sender on my Ranger was bad so I replaced it. Unfortunately before I unplugged the wire to the sender I forgot to disconnect the battery. So now when I start up the truck the gauge needle is under the "low" reading and will not rise above it due to the guide. Is there anything I can do to fix this or am I screwed?