Register Today It's free! This box will disappear once registered!

Solved SOHC V6 Timing Chain Related PNs

Discussion in 'Under the Hood' started by 2000StreetRod, May 13, 2011.

  • Searches ExplorerForum.com
    1. 2000StreetRod

      2000StreetRod Staff Member Moderator Elite Explorer

      Joined:
      May 26, 2009
      Messages:
      10,336
      Likes Received:
      68
      Trophy Points:
      78
      City, State:
      Greenville, SC
      Year, Model & Trim Level:
      00 Sport FI, 03 Ltd V8
      Listed below are Ford part numbers for SOHC V6 timing chain related components. I try to keep this list current. Two possible discount online Ford OEM suppliers are tousleyfordparts.com and tascaparts.com

      Jackshaft/primary timing chain kit 2U3Z6D256CA includes:
      Crankshaft bolt harmonic balancer E7RY6A340B
      Tensioner-engine jackshaft chain YL2Z6L266AA
      Gasket-cylinder/timing front cover F77Z6020AB superseded by 1L2Z6020AA
      Sprocket/gear-engine jackshaft/intermediate 2U3Z6M264AA
      Guide-engine jackshaft chain 2L2Z6K297AA
      Bolt-jackshaft sprocket bolt F77Z6M264BA superseded by 2L2Z6279AA (included when 2U3Z6M264AA is purchased)
      Sprocket/gear-crankshaft two wheel drive 2L2Z6306BA
      Chain-engine jackshaft F77Z6268AB
      Bolt-camshaft sprocket right hand
      Bolt-camshaft sprocket left hand F77Z6279BA

      Left/front timing chain cassette assembly 7U3Z6A257A includes:
      Timing chain
      Guide assembly YL2Z6M273AA superseded by 7U3Z6A257A
      Bolt-guide assembly upper mount
      Sprocket/gear-camshaft
      Sprocket/gear-jackshaft front

      Right/rear timing chain cassette assembly 4L2Z6M290AA includes:
      Timing chain
      Guide assembly
      Sprocket/gear-camshaft
      Sprocket/gear-jackshaft rear

      00M12 intake manifold kit YL2Z9E473AA includes:
      Lower intake manifold gasket set of six YL2Z9461AA
      Upper intake manifold gasket set of two YL2Z9E436AA
      Left timing chain tensioner 7U3Z6K254B
      Tensioner metal O ring XU2Z6M252AA
      Oil restrictor
      Galley plug

      Right timing chain tensioner 7U3Z6K254A supersedes XU3Z6K254BA

      Right timing chain guide assembly upper positioning bolt F77Z6U000BA

      Jackshaft rear sprocket retaining bolt W703167S430

      Cover assy/rear of block jackshaft opening plug F77Z6026AB

      Left cassette assembly lower mounting bolt W500100S300

      Jackshaft chain guide mounting bolt W500100S300

      Sprocket/gear-crankshaft inner four wheel drive F77Z6306BE

      Sprocket/gear - crankshaft outer four wheel drive 2L2Z6306AA

      Balance shaft chain guide F77Z6K297BC

      Balance shaft chain tensioner 1L2Z6L266AA

      Balance shaft chain F77Z6268BC

      Balance shaft assembly 1L2Z6A311AA

      Seal-front timing cover E6TZ6700A was superseded by 5H2Z6700AA

      Seal-rear main crankshaft F5TZ6701A

      Gasket set-valve cover F77Z6584AE

      Gasket-lower oil pan 4L2Z6710AA year 2000+ F77Z6710BA year 1997-1999

      Gasket-upper oil pan/reinforcement section F77Z6710AA

      Block cradle retaining bolt seal F77Z-6734-AB (Listed as engine oil drain plug gasket)

      Left camshaft F7TZ6250AEE was superseded by 7L2Z6250D

      Right camshaft F77Z6250AE

      Exhaust manifold outlet bolts (M12-1.75X54.5 H) N811747S2
       
      Last edited: August 20, 2015
      • Thanks Thanks x 1
    2. Support EF

      Join the Elite Explorers for $20 for 2 years!

      Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself, and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments directly to your posts and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


      to hide adverts.
    3. scdix50

      scdix50 Elite Explorer

      Joined:
      March 8, 2011
      Messages:
      218
      Likes Received:
      0
      Trophy Points:
      16
      City, State:
      New Castle, Delaware
      Year, Model & Trim Level:
      2008 XLT
      I have some more Ford part numbers.
      Bolt-right timing chain guide lower position 4L2Z6U001AA
      Chain-balance shaft F77Z6268BC
      Gasket-valve cover F77Z6584AE (left & right 97-00) (right 01-03)
      Gasket-valve cover F77Z6584BA (left 01-03)
      other parts
      Seal-rear main crankshaft F5TZ6701A or FEL-PRO BS40619 (seal w/repair sleeve)
       
    4. biznaz

      biznaz New Member

      Joined:
      March 24, 2011
      Messages:
      10
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Fremont, ca
      Year, Model & Trim Level:
      98 Eddie Bauer Explorer
      I looked on tousley for the lower right tensioner. The part number you listed pulls up if I look just for that part#. If I look under my vehicle (98 explorer) no number comes up. Do you know if the number you list will work for my year?
       
    5. 2000StreetRod

      2000StreetRod Staff Member Moderator Elite Explorer

      Joined:
      May 26, 2009
      Messages:
      10,336
      Likes Received:
      68
      Trophy Points:
      78
      City, State:
      Greenville, SC
      Year, Model & Trim Level:
      00 Sport FI, 03 Ltd V8
      works for all 4.0L SOHC V6

      PN 7U3Z6K254A is the correct right hydraulic/spring tensioner for all Ford 4.0L SOHC V6 engines.
       
    6. biznaz

      biznaz New Member

      Joined:
      March 24, 2011
      Messages:
      10
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Fremont, ca
      Year, Model & Trim Level:
      98 Eddie Bauer Explorer
      Thanks Dale!
       
    7. Xploda1

      Xploda1 New Member

      Joined:
      April 19, 2011
      Messages:
      3
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      adelaide, south australia
      Year, Model & Trim Level:
      98 XLT
      hey guys uve got the part no. for the crankshaft bolt harmonic balancer, but i was wondering if anyone knows the size and thread type???
       
    8. krispy97xlt

      krispy97xlt Active Member

      Joined:
      April 23, 2003
      Messages:
      111
      Likes Received:
      1
      Trophy Points:
      0
      City, State:
      LaGrange, Ga
      Year, Model & Trim Level:
      '01 Sport Trac 4x4
      So I am shopping to replace this tensioner (I have an oil leak and I just wanted to replace the crush washer, but I figured if I have it out I might as well replace it)

      I have found both part numbers for sale, I understand the 7U____is "newer" than the XU____ is there any improvement in the newer one?

      It is about 20$ less expensive to get the XU____ tensioner and wanted to know if there was any reason not to get the less expensive one.

      Thanks for the help!

      -Chris
       
    9. 2000StreetRod

      2000StreetRod Staff Member Moderator Elite Explorer

      Joined:
      May 26, 2009
      Messages:
      10,336
      Likes Received:
      68
      Trophy Points:
      78
      City, State:
      Greenville, SC
      Year, Model & Trim Level:
      00 Sport FI, 03 Ltd V8
      new old stock?

      If you found one with the old part number it may be new old stock. The last upgrade was in 2002. There were significant changes in the left tensioner but I don't know about the right one. Is it OEM or aftermarket. Many of the new inexpensive aftermarket tensioners have weaker springs than the old one in the vehicle according to some members. For some the piston will freeze in the bore. If it sticks extended the guide assy will break. If it sticks fully retracted the timing chain can slip. Make sure and hand test the piston movement in the cylinder bore before installing.
       
    10. krispy97xlt

      krispy97xlt Active Member

      Joined:
      April 23, 2003
      Messages:
      111
      Likes Received:
      1
      Trophy Points:
      0
      City, State:
      LaGrange, Ga
      Year, Model & Trim Level:
      '01 Sport Trac 4x4
      These changes in 2002 were with the new tensioner guide design correct?

      I am installing into a 2001 Job 2 Sport Trac. This was pre design improvement. Would the older part be better in that application?

      Checking with eBay's will it fit chart it calls for me to use the later 7X part number....

      Is it worth the extra $ to buy the OEM part?

      An OEM one is roughtly 60$...
       
    11. 2000StreetRod

      2000StreetRod Staff Member Moderator Elite Explorer

      Joined:
      May 26, 2009
      Messages:
      10,336
      Likes Received:
      68
      Trophy Points:
      78
      City, State:
      Greenville, SC
      Year, Model & Trim Level:
      00 Sport FI, 03 Ltd V8
      doesn't matter which vehicle

      I'm not aware of any camshaft timing chain related requirements differences for different years and models of the Cologne SOHC 4.0L V6. The parts should work on Mustangs, Rangers, Mountaineers and Explorers. Some members have purchased the 4USA components and reported they are of good quality. From what I've heard from members who recently purchased OEM hydraulic tensioners they probably aren't worth the difference compared to a quality aftermarket one. The problem is determining the quality of the aftermarket unit. Tasca Parts sells 7U3Z6K254A online for $47.75 plus shipping. If the older one only costs $30 it's probably worth it since it's not that difficult to replace.
       
    12. JakePSD

      JakePSD Active Member

      Joined:
      March 25, 2010
      Messages:
      389
      Likes Received:
      1
      Trophy Points:
      18
      City, State:
      Ohio
      Year, Model & Trim Level:
      2003 Mercury Mountaineer
      The part numbers for the front and rear jackshaft bolts are not showing up in my local dealers system. Any updates on those? Also, which bolts are torque to yield and have to be replaced when doing this job?
       
    13. 2000StreetRod

      2000StreetRod Staff Member Moderator Elite Explorer

      Joined:
      May 26, 2009
      Messages:
      10,336
      Likes Received:
      68
      Trophy Points:
      78
      City, State:
      Greenville, SC
      Year, Model & Trim Level:
      00 Sport FI, 03 Ltd V8
      parts availability

      Bolt-jackshaft sprocket bolt 2L2Z6279AA available from Tasca Parts $5.80
      Jackshaft rear sprocket retaining bolt W703167S430 available from Tasca Parts $6.45

      Torque specifications: SOHC V6 Torque Specifications
       
    14. JakePSD

      JakePSD Active Member

      Joined:
      March 25, 2010
      Messages:
      389
      Likes Received:
      1
      Trophy Points:
      18
      City, State:
      Ohio
      Year, Model & Trim Level:
      2003 Mercury Mountaineer
      This thread should be stickied.
       

      Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments directly to your posts and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.
    15. allend15

      allend15 New Member

      Joined:
      April 7, 2014
      Messages:
      13
      Likes Received:
      0
      Trophy Points:
      1
      City, State:
      Dittmer, MO
      Year, Model & Trim Level:
      1998 Ford Exp XLT 4.0 4x4
      Has anyone used Sealed Power Timing Chain kits for the front and rear 4.0L SOHC?

      They look like they are built tough but also expensive.
       
    16. Auspuff

      Auspuff New Member

      Joined:
      November 16, 2017
      Messages:
      13
      Likes Received:
      0
      Trophy Points:
      1
      City, State:
      Dubai
      Year, Model & Trim Level:
      1998 XLT 4L SOHC 4WD
      I have a headache trying to figure out the part numbers for the tensioners. After several hours of searching, and a visit to the local Ford dealer, here's what I am scratching my head about.

      The correct part number for the revised (longer) LH front tensioner is 7U3Z-6K254-B. This one I think superseded part number F4TZ-6K254-A which seems to be the same tensioner used for the 4.0L OHV engine.

      The correct part number for the shorter RH rear tensioner is 7U3Z-6K254-A. This one superseded the previous RH tensioner which was XU3Z-6K254-BA.

      That conclusion based on part numbers I got from Ford, websites like Tascaparts, and all the posts I read here.

      But the Ford parts catalog seems to have the LH and RH tensioner part numbers mixed up. In the diagram below from Ford (if I've done the uploading correctly), you can see the RH tensioner is labeled 6K254B, and the LH tensioner is labeled 6K254A.

      Since the tensioners are different lengths, I expect fitting them round the wrong way will cause a problem.

      So my question is, what is the explanation for the conflict? And, whichever parts I get, make sure the longer tensioner goes on the LH side?
      explorer-timing-chains-tensioners-ford-parts-diagram.jpg

      And ... about the previous post ...

      Hope you don't mind, I used your question to start a new topic. I want to know also ...

      Sealed Power timing chain kits vs Cloyes or OEM Ford quality?
       
    17. 2000StreetRod

      2000StreetRod Staff Member Moderator Elite Explorer

      Joined:
      May 26, 2009
      Messages:
      10,336
      Likes Received:
      68
      Trophy Points:
      78
      City, State:
      Greenville, SC
      Year, Model & Trim Level:
      00 Sport FI, 03 Ltd V8
      As I recall, the chain tensioner for the OHV-V6 is a ratchet type tensioner that is entirely different from either SOHC-V6 cassette tensioner. I found a photo of one shown below.
      OHVTensioner1.jpg
      It is similar to the tensioners used on the 4.6L V8s.
      TensionerL.jpg
       
    18. Auspuff

      Auspuff New Member

      Joined:
      November 16, 2017
      Messages:
      13
      Likes Received:
      0
      Trophy Points:
      1
      City, State:
      Dubai
      Year, Model & Trim Level:
      1998 XLT 4L SOHC 4WD
      I don't remember now how I got the idea the SOHC engine initially used OHV tensioners. Probably because I'm looking at pictures and part numbers online at present, not real tensioners. I've discovered that pictures online often don't match the real thing.

      I'm still interested in trying to reconcile the conflicting part numbers for the LH and RH tensioners, so that I don't end up ordering the wrong ones, or have them go in the wrong place.

      The picture from Ford says 6K254B is for the RH tensioner (rear), and 6K254A is for the LH tensioner (front).

      But the full part numbers have the A and B reversed, as in:

      7U3Z-6K254-A for the RH tensioner (rear)
      7U3Z-6K254-B for the LH tensioner (front)

      I'm going to go with those last two part numbers as the correct ones and hope that the conflict is a typo in the picture, or because I don't understand something about the Ford part numbering system. Yeah, I even spent a day learning their system to try and understand the conflict (unsuccessfully).
       
    19. 2000StreetRod

      2000StreetRod Staff Member Moderator Elite Explorer

      Joined:
      May 26, 2009
      Messages:
      10,336
      Likes Received:
      68
      Trophy Points:
      78
      City, State:
      Greenville, SC
      Year, Model & Trim Level:
      00 Sport FI, 03 Ltd V8
      7U3Z-6K254-A: right (passenger side in US) rear cassette tensioner
      7U3Z-6K254-B left (driver side in US) front cassette tensioner
      The long tensioner goes in the front. I don't know why the Ford parts catalog drawing is labeled incorrectly.
       
    20. floridacatfan

      floridacatfan New Member

      Joined:
      August 28, 2013
      Messages:
      17
      Likes Received:
      0
      Trophy Points:
      1
      Year, Model & Trim Level:
      1998 explorer xlt 4.0 soh
      2000StreetRod - From your parts list "YL2Z6M273AA superseded by 7U3Z6A257A"

      Is 7U3Z6A257A and improved version of YL2Z6M273AA or is it just superseded ?

      I have a record of Ford replacing mine (YL2Z6M273AA) at 48 k and I am now at 160 k - If I was to replace it should it be 7U3Z6A257A or YL2Z6M273AA ?
       
    21. 2000StreetRod

      2000StreetRod Staff Member Moderator Elite Explorer

      Joined:
      May 26, 2009
      Messages:
      10,336
      Likes Received:
      68
      Trophy Points:
      78
      City, State:
      Greenville, SC
      Year, Model & Trim Level:
      00 Sport FI, 03 Ltd V8
      YL2Z6M273AA is just the "plastic" guide assembly. It's been many years since just the guide assembly could be individually purchased. Ford claimed that wear patterns were quickly established with the chain and sprockets and used that to justify only selling the complete cassette 7U3Z6A257A. That cassette guide has been modified to utilize a circlip/bushing instead of a pressed bushing which allows disassembly of the cassette guide.
      7U3Z-6A257-A.jpg
       
    22. Auspuff

      Auspuff New Member

      Joined:
      November 16, 2017
      Messages:
      13
      Likes Received:
      0
      Trophy Points:
      1
      City, State:
      Dubai
      Year, Model & Trim Level:
      1998 XLT 4L SOHC 4WD
      Thanks StreetRod.

      And huge thank you to you for all your other invaluable posts. So much excellent information and pics in them.
       

    Share This Page







    We Support Our Troops!