Search results

Ok so hopefully it was just that I didn't have the connector all the way snapped on. Not sure if that was it but it sure seemed to pull of easily the first time. After reconnecting it I could get it off as easily the second time. I took it for a drive down the interstate and got no codes so I'm...

After driving the truck again, the codes came back and now there is one more. P0708 Transmission Range Sensor Circuit High Input I haven't had a chance to get under there yet to take a look see, it is 0* outside right now. I will have to move some vehicles around and get it in the garage. But...

Yes I did clear the codes from the old trans. No, the only sensor i have now is from the old trans. I will check everything from the first reply tomorrow. I did figure on checking the connection but didn't have time today. And it sure is cold out now. 9* right now. Thanks for the help. I hate...

P0705 Transmission Range Sensor Circuit malfunction (PRNDL Input) I now get this code after swapping trans in the wife's 98 Explorer sohc. What does it exactly mean? The truck runs and drives just fine but it get this code. Before the swap I had a code P0706 Transmission Range Sensor...

I am using a trans cooler flush and the trans is out. Just want to make sure all the junk is out before the replacement goes in.

Which line on the 5r55e is the in and out at the trans? Top or bottom? I am replacing my trans and need to flush my system.

I have found a replacement trans at the local salvage yard for $400. Should I just go this route or just rebuild the one I have?

Dave keep me up to date with what you find. I will be digging into mine later tonight. I'm going to drop the pan and see what I find. That is if I can get the exhaust off. I have a friend coming over with a professional obd II scanner to see if he can pull any codes. My cheap one didn't find...

I have a 98 SOHC Explorer. The trans is slipping in all gears, to the point that it will barely move in any gear. But I do have reverse and forward gears but it takes a lot to get it moving. From what I know, my wife drove it to work the other night and said the O/D light was flashing but...

Any other ideas?

Ok so I changed the ignition switch and it still is doing the same thing. Sometimes it starts right up and then nothing, still not cranking most of the time.

Nothing seems to be for sure yet. I have tried to move the shift lever when trying to start it and one time it started but the rest it did not. I pulled the ignition switch and messed with that but nothing, so I will try and replace that.

Well I have the lower panel off the dash and got the indicator tightened up. Didn't really seem to make a difference. I pulled the tumbler and was playing with that a little. I also will be changing out the ignition switch tomorrow. Is there any adjustment for the shift cable down at the...

I was just out messing with it and noticed that the gear selector indicator does not align well with the letters on the dash. I know that when put into park sometimes I have to manually push the lever up to get the key out. How do you realigned the shift linkage to get it set right? Could this...

I was kinda hoping that's what it wasn't. How does that need to be replaced with the anti-theft?

I have been having a problem with the 98 not starting the last couple of days. Putting the key in and turning it does not crank every time. I am thinking maybe it is a bad ignition switch but not sure. After turning the key a few times the doors will unlock and lock but no crank. Sometimes...