Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. T

    Importance of vehicle being level for oil change?

    Got tired of lube techs spilling oil on the engine and using the cheapest possible oil filter, not to mention the time they left the air filter box open after checking the filter. Anyway, going to change my oil at home, but do not have a fancy 4-point lift or a coffin pit in my garage. Only have...
  2. T

    Drain shock absorber

    I replaced the shocks and struts on my 2014 Explorer Limited but now need to get rid of the old ones. If you google around, many pages mention auto parts stores will take them. Lies! I called 6 different stores(Autozone, NAPA, O'Reilly, etc.). Even called a specialty wheel and tire place that...
  3. T

    Sway bar end link tight fit

    Replacing lower control arm, strut assembly and sway bar end link on my 2014 Explorer Limited (3.5L v6, non-turbo, FWD). Using all OEM parts from RockAuto(great prices for OEM!) Got the control arm and strut installed no problem(ok, removing the nut off the control arm to the knuckle was a...
  4. T

    Front Strut Assembly part numbers mix-n-match?

    Going to replace the front struts on my 2014 Explorer Limited (3.5L v6, non-turbo, FWD). Looking at Ford's parts website(which is horribly slow and expensive) as a reference with my VIN entered, ASTL65 shows it's suitable for the right-front strut, but the other part ASTL64 shows it's left OR...
  5. T

    Correct AC compressor pulley bearing size?

    I have a 2014 Explorer Limited with a rattle noise on the AC compressor. AC works fine, but I'm worried it will eventually seize up and screw something up bad, like the whole compressor or even burn off the belt while driving. I took off the belt and while the pulley spins freely, I can wobble...
  6. T

    Oily residue on air plenum during spark plug change - normal?

    When changing my spark plugs, I went to replace the air plenum gasket and noticed a build up of oil residue(see photo). Is this something to be concerned about or pretty normal? It was moist and came off easily with the rag, not hard, crusty or baked-on. I wiped it off before replacing the...
  7. T

    Slow humming sound after spark plugs changed

    Just changed all my spark plugs and the PCV. Not my first rodeo, gapped the plugs to spec(they were pretty much there already), coil packs looked fine, replaced the air plenum gasket, put on anti-seize lube on the plugs after I was burned owning a Mustang where they broke off inside during a...
Back
Top