Search results

Update to upgrade Well folks I'm back with a update, This whole thing started out easy enough trying to get the check engine lite to go out with removing the bulb. Now the lite is out and she breaths muck easier, 2.5 exhaust proflow muffler(I wonder about the stock cat?), BBK 66mm TB, KKM...

Sound easy enought I will post the results..

Hi folks, can't thank you guys enought for the last fix. I have a shimmy while braking and I really dont know where to start, have replaced the rotors and calipers some time ago I just dont want to start throwing money at it without some input. Any and all advice will bwe appreciated.

I'm just guessing here, check vacuum to trans and also the mod-u-later might be out of adjustment. That sloved the problem I once had on a 63 ford years ago.

Ok, I just got the the new air filter in place, throttle body, and exhaust on and she does sound alot different, great pull and noticeable improvement to the throttle responds, I like it!!! Thank for all the input, Great site!! Now I want to eliminate the fan and clutch assy with electric...

Check your fuel pressure

Believe that hose is part of the vapor canister system about 3-4 inch

Hi Folks Just thinking about intake, Where would one start? Also I found something call a "throttle body spacer", what does it do beyond the obvious? I guess I already started modding her, being I don't get parts from the "Dealer" so I might as well keep going. Looking for good clean...

Just fixed poor idle, stalling, and a check engine light after about 15-20 min run time. After chasing codes, replumbing vacuum lines, changing sensors I found it to be the fuel pressure regulator. So all is well and the wife will be taking back her car this weekend. Thanks for all the...

Well here we go the code now is 41 in both KOEO and KOER also she seems to smooth out when I DC a vacuume line at the manifold now i will drive and see what it does. I'm totally confused but not willing to give up.

Yes the car was warm before I started and as for the CM codes, I belive they were lost after the shop got the codes for me before I got hold of a reader. Also I tested the O2 sensor for ohms (about 6) and voltage (between 0.01-1.1). The MAP tested good also pins A-B (14 volts) pins C-D...

Shorty, Got hold of a reader with a led read out, read everything re-ran the test this time it pass the KOEO also test timing seems tobe workimg fine and now the code 41 is all I got after the KOER test HO2S sensor low voltage / sensor lean. So what to do rith the info? Who in sending the bad...

Mr Shorty, Thanks for the reply, I guess I got ahead of myself, Should read the paper work alittle more carefully, no it did not pass KOEO, I got 84 (EGR-V) & 41(EGO) I hope I'm doing this right!

Hi Folks, I got a 91 xlt with a check engine light that keeps coming on, the codes I get tell me its the EGR circuit yet I can't seem to find a EGR valve 32 also got code 42 EGO, already changed the O2 sensor still runs the same Bad idle stalls as if vacuum leak (can't find a leak new...