Search results

Sounds good. Please email at cbright99@hotmail.com .... take the sale details off of here. P.S. Guess you didn't notice my signature line.... 93 xlt - shackels and coil spacers... Thanks, Chris

Hi all, Broke a front spring on my 93 (4-door/4wd). Any one have a spare they'd let go for a good price? Please send an email to cbright99@hotmail.com with the asking price. Thanks, Chris

Getting my 93xlt back in shape for winter and the brake need a bunch of work. They kind of work, but are so soft that they are unsafe... the pads and drums are long over due for replacing... I'll do that for sure. My question is about how soft the breaks are.... Impossible to lock up/get...

Hi all, It isn't the fuel pump relay... I jumped it (wired) so that it would always run and I got the same results... I sure it is just something water logged, but it has been 4 days so I took it over to the local Ford... I stressed that I didn't expect it to be anything major and that I...

Just bumping the post up because I haven't got any responces. :frustrate

My ex was working fine until Monday when I thoughly washed it after a day in the mud. I was washing in the front wheelwells and probably got some/alot of water on the components under the hood. Here are the symptoms; 93 XLT - 4.0 pushrod Truck will start and run for a few seconds the...

Hi all, I was out in the mud on the weekend and got my Ex really dirty. On Monday I washed it (took ALOT of water to get it mostly clean.... I was spraying water into the radiator and lots up into the front wheelwells. :banghead: After truck was "clean" I went to start it up. The engine...

Here it is... actual got 2.1" of lift in the back from the shackels alone and the front is now slightly higher with to coil spacers... I plan on doing a zimmerman/ranger add a leaf mod which should level it off perfectly...

Hi all, I have a 93 xlt that I just did a shackel/spacer lift on. See the before and after... http://albums.photopoint.com/j/View?u=927078&a=12610185&p=56929825&Sequence=0&res=high I also have a trailmaster 3" body lift kit that I'm going to install... When reading the instructions it...

Part Numbers Warrior Shackles ... WAR-153 at DesertRat.com F-150 Coil Spaces ... F2TZ-5A307-A and F2TZ-5A307-B (one each side) at Ford dealership 3" Trail Master Body Lift ... 9350 at alot of places Transfer Case for 91-94 ... BW 13-54 in the junk yard That's all I've needed so...

Thanks for the info on the bolts... As for the type of noise the t-case is making, it is a constant clicking whenever I'm moving faster than 5 mph. The truck still works fine... 4 high and low work (although my hubs are crap... replacing with manuals) I found a used t-case for $250can...

Thanks for the reply... Did you change a BW 13-54 (first generatio explorer)? I noticed you had a newer ex. I didn't see any mention of odd bolts in the Haynes manual for my truck (93xlt).

Hi there, I just fixed the motor on my screwed up t-case and I going to put in a used t-case to replace mine that is making an awful clicking noise. I've read in the Hayes manual about removing the t-case and it seems fairly easy. fluid, two drive shafts, five bolts, some wires. Is there...

Hi all... Got the motor working by taking it apart an cleaning it. One note, you don't have to cut any wires to remove the motor from under the truck. Just removed the red plug inside the connector and then pull out the three wires by moving the catches away from the pins. Also, if the...

Thanks for the info... makes sense... Chris

Okay thanks... If it is +12v and ground, where should I feed it from? I can feed 12v and ground from a PC supply or from a panel which is part of my audio system (ie. right from the battery). Which should I do? I don't want to feed the motor too many amps and burn it out? Thanks...

Hi there, I have my shift motor from the transfer case off my vehicle... isn't working right now.... I'm about to clean it up and then test it. I've read the pages on testing it, but I have one question about applying the voltage to it to get it to rotate. The pages said to apply "+12v to...

Hi there, Didn't get a response, so I'm reply to bring the message to the top. Chris

Hi all, The transfer case on my 93 xlt (auto transmission, push button 4x4) is shot.... It makes a clicking sound when running about 10mph and the guy I had look at it said there are metal shavings inside :( Anyways, I'm going to look for a used one off an old explorer in the junk yard...

I'd like it to match the lift that shackels with or without the ranger leaf will give in the back in the back. Chris

Hi all, I'm going to do a war153 shackle and zimmerman mode to my 93 XLT 4-door. What is the exact part # that I should use to space the front? I'd like to go with coil spacers... my front coil are only a year old. What size should they be to match the shackle/zim in the back.... my rear...

Hi all, I'm looking at modifing my '93 XLT 4-door for off roading. After reading lots of posts on different lift and their costs, I've decided to go with the following; Warrior shackles in the rear.... I might replace the leafs or add-a-leaf because they have sagged a bit over the...