V6 ohv pulleys

sierra3dr · June 22, 2014

Ok forum users,I'm intending to use a crank pulley on my 2.8 cologne as it has the toothed section for the crank sensor,which in turn requires me to use the other pulleys. Would anyone have a photo of the serpentine pulley layout?

Thanks
Paul

Anime · July 8, 2014

You mean you're using a 4.0L crank pulley/harmonic balancer and so will need to use the other pulleys?

This is the standard diagram of the 4.0L belt drive layout, though keep in mind many also have the tensioner and the idler in opposite locations depending on the type of tensioner used:

4x4junkie · September 22, 2014

Anime said:
This is the standard diagram of the 4.0L belt drive layout, though keep in mind many also have the tensioner and the idler in opposite locations depending on the type of tensioner used:

Engines that have the tensioner up top ('93-older) route the belt to the inside of the lower idler pulley.

V6 ohv pulleys

sierra3dr

New Member

Anime

EF YEAH!!

4x4junkie

Explorer Addict

Explorer Features

Explorer Features

Similar threads

Featured Content