Where is it and How!

speerskija · 04-14-2006, 12:05 AM

My 92 EB isn't shifting from 1st to 2nd until I let off the gas. It used to only do it when it was cold, now it is consistent. I have heard it is probably a sticking governor. Now the question is where is the governor, what is the governor, and how can I fix it?

*jimbo74* · 04-14-2006, 12:46 AM

sounds more liek a kickdown cable than anything else......

**BrooklynBay** · 04-26-2006, 12:09 AM

The governor is located in the rear of the transmission in the extension housing. It is just a weight, with some springs. They tend to bind after a while.

**BrooklynBay** · 04-26-2006, 12:16 AM

Here is an exploded view of an A4LD's governor (photo courtesy of Glacier991).

**Maniak** · 04-26-2006, 11:25 AM

There are a few threads (including instructions) on cleaning/replacing the governer..

Its not too hard to get to (on a 4x4).. but you do have to remove the transfercase to get to it..

~Mark

04-14-2006, 12:05 AM	#1
speerskija Wannabe Elite Explorer Utah 92 Eddie Bower Join Date: Apr 2006 Posts: 20 Vehicle Specs (Original Poster)	Where is it and How! My 92 EB isn't shifting from 1st to 2nd until I let off the gas. It used to only do it when it was cold, now it is consistent. I have heard it is probably a sticking governor. Now the question is where is the governor, what is the governor, and how can I fix it?

04-14-2006, 12:46 AM	#2
jimbo74 Elite Ranger NorCal 98 XLT Supercab 4x2 Join Date: Dec 2000 Posts: 17,902 Vehicle Specs*	sounds more liek a kickdown cable than anything else...... __________________ My Truck

04-26-2006, 11:25 AM	#5
Maniak Moderator-Stock 91-94 Vail, Arizona 1992 XLT 4x4 Join Date: Feb 1999 Posts: 10,723 Vehicle Specs	There are a few threads (including instructions) on cleaning/replacing the governer.. Its not too hard to get to (on a 4x4).. but you do have to remove the transfercase to get to it.. ~Mark __________________ Click HERE to see our Explorer Specs

04-26-2006, 12:09 AM	#3
BrooklynBay Aerostar Forum Moderator Brooklyn, NY 88 89 93 95 96 Aerostars Join Date: Nov 2005 Posts: 45,680 Vehicle Specs	The governor is located in the rear of the transmission in the extension housing. It is just a weight, with some springs. They tend to bind after a while.

04-26-2006, 12:16 AM	#4
BrooklynBay Aerostar Forum Moderator Brooklyn, NY 88 89 93 95 96 Aerostars Join Date: Nov 2005 Posts: 45,680 Vehicle Specs	Here is an exploded view of an A4LD's governor (photo courtesy of Glacier991).