np435/302

cole01 · 05-06-2007, 10:54 PM

I have an np435 off of a 351m need to put it on a 302 can anyone help me with a parts list and where to get them like bell housing,etc i

**james t** · 05-07-2007, 05:33 AM

You need a 289/302/351W bellhousing and clutch. Thats pretty much it. 3 on the tree and 4 speed stuff is all the same, so look for someone with an early Bronco 3 speed that swapped to an automatic or even a junkyard 3 on the tree car/truck.

gfbgreaser289 · 05-08-2007, 06:34 PM

use a 86 to 98 f150 or f250 with a 351. they use a hydraulic clutch similar to the ranger. if you get a hydraulic clutch line from a 32 ranger it'll fit perfectly with the 150 slave. same setup im running on my ranger. i have a 302 435/205

gfbgreaser289 · 05-08-2007, 06:36 PM

Ford F-150 Bellhousing part No. E4TZ-7505C
Ford Slave Cylinder part No. E4TZ-7A564A
Ford Slave Cylinder Bracket part No. E4TZ-7A544A
Ford Release Lever part No. E4TZ-7515C
Ford Dust Boot part No. E4TZ-7513A
Ford Bellhousing Cover Plate part No. E7TZ-7007A
Ford Release Bearing part No. N1714
Centerforce Explorer Disk part No. 381116
Ford Pressure Plate (5/16") part No. CF260000 (11" Pressure Plate)
Ford Pressure Plate (3/8") part No. CF360049 (11" Pressure Plate)

this will help.

cole01 · 05-13-2007, 07:13 PM

are all np435 hyd slave or a some cable, if i get a cable will it still work

gfbgreaser289 · 05-25-2007, 04:46 AM

why would you go cable when you already have all the hydraulic set up. with those parts right there its a bolt on app. no custom anything.

05-06-2007, 10:54 PM	#1
cole01 Wannabe Elite Explorer Dryden 1986 Bronco 2 Join Date: Sep 2006 Posts: 58 Vehicle Specs (Original Poster)	np435/302 I have an np435 off of a 351m need to put it on a 302 can anyone help me with a parts list and where to get them like bell housing,etc i

05-07-2007, 05:33 AM	#2
james t moderation Texarkana AR/TX 94 SAS sport Join Date: Jan 2002 Posts: 11,258 Vehicle Specs	You need a 289/302/351W bellhousing and clutch. Thats pretty much it. 3 on the tree and 4 speed stuff is all the same, so look for someone with an early Bronco 3 speed that swapped to an automatic or even a junkyard 3 on the tree car/truck. __________________ my rebuild

05-13-2007, 07:13 PM	#5
cole01 Wannabe Elite Explorer Dryden 1986 Bronco 2 Join Date: Sep 2006 Posts: 58 Vehicle Specs (Original Poster)	np435 are all np435 hyd slave or a some cable, if i get a cable will it still work

05-08-2007, 06:34 PM	#3
gfbgreaser289 Wannabe Elite Explorer ft bragg nc 90 Join Date: May 2007 Posts: 9 Vehicle Specs	use a 86 to 98 f150 or f250 with a 351. they use a hydraulic clutch similar to the ranger. if you get a hydraulic clutch line from a 32 ranger it'll fit perfectly with the 150 slave. same setup im running on my ranger. i have a 302 435/205

05-08-2007, 06:36 PM	#4
gfbgreaser289 Wannabe Elite Explorer ft bragg nc 90 Join Date: May 2007 Posts: 9 Vehicle Specs	Ford F-150 Bellhousing part No. E4TZ-7505C Ford Slave Cylinder part No. E4TZ-7A564A Ford Slave Cylinder Bracket part No. E4TZ-7A544A Ford Release Lever part No. E4TZ-7515C Ford Dust Boot part No. E4TZ-7513A Ford Bellhousing Cover Plate part No. E7TZ-7007A Ford Release Bearing part No. N1714 Centerforce Explorer Disk part No. 381116 Ford Pressure Plate (5/16") part No. CF260000 (11" Pressure Plate) Ford Pressure Plate (3/8") part No. CF360049 (11" Pressure Plate) this will help.

05-25-2007, 04:46 AM	#6
gfbgreaser289 Wannabe Elite Explorer ft bragg nc 90 Join Date: May 2007 Posts: 9 Vehicle Specs	why would you go cable when you already have all the hydraulic set up. with those parts right there its a bolt on app. no custom anything.