New Member with questions!

rikkitikkitavi · 01-11-2002, 04:32 PM

Hi all,

THis is my first post, and yes I lurked and read for about a week b4 posting! I just bought a 94 xlt 4x4 with 122k on the odometer for use as a third vehicle, fishin/camping rig. Ive already replaced the hubs with Warn manuals, had the tranny flushed and filled, new serp belt and amgetting ready to change the oil and do a tune up. Can you guys answer the following

1. How can I tell what gearing, posi/limited slip etc is on the Ex? By vin or call ford or by any web site?

2. I am getting about 13MPG!

3. The engine rattles if I accelerate rapidly, but not at idle or at highway speed.

THanks!

RIkki

aldive · 01-11-2002, 04:36 PM

Quote:

Originally posted by rikkitikkitavi
1. How can I tell what gearing, posi/limited slip etc is on the Ex? By vin or call ford or by any web site?
RIkki

Welcome aboard...

Take a look at http://www.users.qwest.net/~ntrpriz/Axle.htm

Hope this helps....

*X24* · 01-11-2002, 09:33 PM

I had that rattle on my 93 when I would hit the gas hard. Sounded like it was coming from under the hood right in front of the driver. I didn't have it long enough to bother checking out what it was. I know that doesn't answer your question, sorry.

**JDraper** · 01-12-2002, 07:51 AM

The rattle you hear may be pinging from the timing advance. Try disconnecting your battery for about 20 minutes and then reconnecting it. This will reset the computer. The Explorer computer adjusts itself to your driving habits(primarily how heavy a foot you have

) , and your habits may be considerably different than the previous owners. By resetting the computer, it will more quickly adjust the timing curve to your style of driving.

**Heath** · 01-12-2002, 11:15 AM

Hey Aldive tell him where to find his axle code!!!

Okay I'll do it... Its on the sticker on your drivers door...

Since no one else has done it yet I will be the first... Welcome to the board!!!

aldive · 01-12-2002, 11:26 AM

Oooops... I gave the info on how to read them but not where to fine em..... so sorry.

rikkitikkitavi · 01-12-2002, 05:39 PM

Thanks! I seem to have the D4 which should be limited slip, however when I discovered in the snow that my hubs were shot, I also would just sit and spin one rear tire.......does the limited slip wear out like the hubs?

Thanks guys.

ChewieM16 · 01-12-2002, 05:53 PM

rikki tikki tavi! i remeber reading that story in 7th grade! geez, that was liek 6 years ago! lol

**JDraper** · 01-12-2002, 06:50 PM

Quote:

Originally posted by ChewieM16
rikki tikki tavi! i remeber reading that story in 7th grade! geez, that was liek 6 years ago! lol

6 years ago??? Man, make me feel old why dont'cha!! Try 7th grade in 1977 for me

mdrut · 01-12-2002, 07:01 PM

I remember seeing the animated movie back in the mid to late 70's....Damn, I'm getting old..
Welcome to the site, and good luck on your quest..
BTW..Yes, the limited slip does become worn and requires rebuilding..

*X24* · 01-12-2002, 09:12 PM

I dont know what kind of schools you have near you, but around here we learn that story in 1st grade.

01-11-2002, 04:32 PM	#1
rikkitikkitavi Wannabe Elite Explorer columbus Oh 94 xlt Join Date: Jan 2002 Posts: 6 Vehicle Specs (Original Poster)	New Member with questions! Hi all, THis is my first post, and yes I lurked and read for about a week b4 posting! I just bought a 94 xlt 4x4 with 122k on the odometer for use as a third vehicle, fishin/camping rig. Ive already replaced the hubs with Warn manuals, had the tranny flushed and filled, new serp belt and amgetting ready to change the oil and do a tune up. Can you guys answer the following 1. How can I tell what gearing, posi/limited slip etc is on the Ex? By vin or call ford or by any web site? 2. I am getting about 13MPG! 3. The engine rattles if I accelerate rapidly, but not at idle or at highway speed. THanks! RIkki

01-11-2002, 09:33 PM	#3
X24 RAMajama Pleasant Valley, NY 05 RAM 2500 TURBO DIESEL Join Date: Nov 2001 Posts: 4,995 Vehicle Specs	I had that rattle on my 93 when I would hit the gas hard. Sounded like it was coming from under the hood right in front of the driver. I didn't have it long enough to bother checking out what it was. I know that doesn't answer your question, sorry. __________________ X24's Page 1998 XLT - PICS -- MORE PICS -- My Email 2004 MXZ REV 600HO

01-12-2002, 07:51 AM	#4
JDraper Elite Garage Builder McVeytown, PA '11 XLT Join Date: Jan 2001 Posts: 15,400 Vehicle Specs	The rattle you hear may be pinging from the timing advance. Try disconnecting your battery for about 20 minutes and then reconnecting it. This will reset the computer. The Explorer computer adjusts itself to your driving habits(primarily how heavy a foot you have ) , and your habits may be considerably different than the previous owners. By resetting the computer, it will more quickly adjust the timing curve to your style of driving. __________________ Moderator..Home Improvement/Explorer 911/2011 Explorer Forum You took my breath away....and now I want it back.... '66 Mustang Coupe, '04 Mustang Mach 1, '08 Focus, '11 Explorer XLT "Ex"plorer's: '92 Sport, '94 Sport, '01 XLS Our Crappy Website

01-12-2002, 11:15 AM	#5
Heath Elite Moderator Intoxicator Rigby, ID '01 XLT Slightly Modded Join Date: Sep 2000 Posts: 7,600 Vehicle Specs	Hey Aldive tell him where to find his axle code!!! Okay I'll do it... Its on the sticker on your drivers door... Since no one else has done it yet I will be the first... Welcome to the board!!! __________________ Rigby, ID 2001 Explorer V8 XLT with a mod or two "Never fight an ugly guy, he has nothing to lose" Mugshot Updated 8/6/10 To support the site and upgrade to an elite membership, Click Me!

01-12-2002, 11:26 AM	#6
aldive Elite In Memoriam 1999 XLT Join Date: Jan 2001 Posts: 25,271 Vehicle Specs	Oooops... I gave the info on how to read them but not where to fine em..... so sorry. __________________ Al Franklin My truck My Quest for 30 RIP Al Franklin! 1947-2010. Gone but not forgotten! :(

01-12-2002, 05:39 PM	#7
rikkitikkitavi Wannabe Elite Explorer columbus Oh 94 xlt Join Date: Jan 2002 Posts: 6 Vehicle Specs (Original Poster)	Thanks! I seem to have the D4 which should be limited slip, however when I discovered in the snow that my hubs were shot, I also would just sit and spin one rear tire.......does the limited slip wear out like the hubs? Thanks guys.

01-12-2002, 05:53 PM	#8
ChewieM16 Wannabe Elite Explorer Long Island, New York '94 XLT Join Date: Dec 2000 Posts: 245 Vehicle Specs	rikki tikki tavi! i remeber reading that story in 7th grade! geez, that was liek 6 years ago! lol __________________ 94 XLT 4x4 Mike's Truck Pioneer DEH-P7500MP, MTX 10" Thunderform with Pioneer 300w amp, K&N Filtercharger / Modified Airbox, Dynomax Cat-back Exhaust, Westin Grille Guard, Warn Manual Hubs, 4 KC Daylighters, 2 Hella 550 Fog Lights, 2 KC Back-up Flood Lights, Gabriel Pro Ryder VST's

01-12-2002, 07:01 PM	#10
mdrut Wannabe Elite Explorer Inverness, Fl. '91 sport Join Date: Dec 2000 Posts: 1,096 Vehicle Specs	I remember seeing the animated movie back in the mid to late 70's....Damn, I'm getting old.. Welcome to the site, and good luck on your quest.. BTW..Yes, the limited slip does become worn and requires rebuilding.. __________________ 91 sport,nicely equiped

01-12-2002, 09:12 PM	#11
X24 RAMajama Pleasant Valley, NY 05 RAM 2500 TURBO DIESEL Join Date: Nov 2001 Posts: 4,995 Vehicle Specs	I dont know what kind of schools you have near you, but around here we learn that story in 1st grade. __________________ X24's Page 1998 XLT - PICS -- MORE PICS -- My Email 2004 MXZ REV 600HO