X~Factor's Page

sino · 01-21-2011, 10:10 AM

im lovin it. what % tint do you have and have you gotten any tickets out there in nassau for it?

98SurfSport2WD · 04-29-2011, 10:12 PM

Quote:

Originally Posted by X~FACTOR

Got them replaced with 20's.

These are Bullitt Wheels wrapped with Toyo Proxes 4.
20x8.5; 245/45
20x10; 275/40

The offsets puts the rear VERY closed to the inside edge of the truck. I'd say less than an inch.

Are these the Bullitt wheels from OE wheels llc w/ 24mm/22mm offset?

*X~FACTOR* · 05-27-2011, 10:43 PM

Quote:

Originally Posted by QuietRiot25

00Xplorer you can pick up all types of billet grill/mesh material at home depot or home hardware or ace or whatever you have in your town

McMaster.com is where I get my grills. They are 3003 aluminum, 16 ga.

Quote:

Originally Posted by sino

im lovin it. what % tint do you have and have you gotten any tickets out there in nassau for it?

The truck came with a slight tint from the factory, I just added a light tint more all around.

Quote:

Originally Posted by 98SurfSport2WD

Are these the Bullitt wheels from OE wheels llc w/ 24mm/22mm offset?

Yes, they are.

Quote:

Originally Posted by mr.p

im getting to the point where i need a hood scoop or vented hood to complete the look, can you post up a writeup or tell me exactly how you did the venting, the glassing of the scoop to the hood isnt the issue, i just dont see how you got those vents so clean.

This is what I do. I've done almost a hundred cars, venting the hood. Shoot me an email if any of you guys need it done. RNGALVEZ@MSN.COM

*AlexSport'00* · 12-24-2011, 11:05 PM

You're explorer is sweet! I'm working on murdering out mine at the moment, but with the very few body work skills I have I know it's not gonna look nearly as good at this. Now I'm gonna be jealous so much of yours.
Either way, yours is awesome! Great work.

jakemccarthy · 03-29-2012, 10:11 AM

Nice

*willzilla* · 04-12-2012, 01:12 PM

Looks sick

speedjunkie92 · 05-11-2012, 12:25 PM

so with out the front cv joints it handles fine? i thought about removing my whole front setup too but i wasn't sure if the hub assy would hold it or not i know its pressed together and all i just didn't wanna chance it,
but over all the truck looks awesome dude nice work.

01-21-2011, 10:10 AM	#61
sino Wannabe Elite Explorer New York 2001 SOHC Sport Join Date: May 2008 Posts: 76 Vehicle Specs	im lovin it. what % tint do you have and have you gotten any tickets out there in nassau for it? __________________ pfft. and i used to want a honda

04-12-2012, 01:12 PM	#66
willzilla Elite Explorer Atoka, TN 2000 XLT AWD Join Date: Jul 2010 Posts: 536 Vehicle Specs	Looks sick __________________ - 2000 Xploder XLT 5.0 AWD w/bolt-ons build thread \| modifications \| pictures - 2003 black SVTf w/bolt-ons & lightened modifications \| pictures

03-29-2012, 10:11 AM	#65
jakemccarthy Wannabe Elite Explorer Berwick, Maine 2000 Ford Explorer XLT V8 Join Date: Nov 2011 Posts: 87 Vehicle Specs	Nice

05-11-2012, 12:25 PM	#67
speedjunkie92 Wannabe Elite Explorer newburgh NY 1998 ford explorer 5.0L Join Date: Oct 2011 Posts: 10 Vehicle Specs	so with out the front cv joints it handles fine? i thought about removing my whole front setup too but i wasn't sure if the hub assy would hold it or not i know its pressed together and all i just didn't wanna chance it, but over all the truck looks awesome dude nice work.