91-94 X Schematics / Diagrams

[kgabrielsen]

The diagram showing electrical connections for 93/94 doesnt look like my 94... the battery should be on the pass side front corner, not the drivers side. Pwr distr box also should be pass side... possible this is 91-93 or 92-93? (You said you couldnt find 91/92... just sayin)

Also, the link for 94 explorer below that went away...

[Tbars4]

Originally Posted by kgabrielsen

The diagram showing electrical connections for 93/94 doesnt look like my 94... the battery should be on the pass side front corner, not the drivers side. Pwr distr box also should be pass side... possible this is 91-93 or 92-93? (You said you couldnt find 91/92... just sayin)

..All the books I've seen show that battery on the wrong side, even at the Dealership..

Also, the link for 94 explorer below that went away...

....There are several so if you could clarify it a little bit such as which post it's in maybe I can find a replacement or at least see if there is a picture error..

Thanks..

[kgabrielsen]

Originally Posted by Tbars4

..All the books I've seen show that battery on the wrong side, even at the Dealership..



....There are several so if you could clarify it a little bit such as which post it's in maybe I can find a replacement or at least see if there is a picture error..

Thanks..

The bad links I'm talking about are the next 2-3 following the 93/94 diagram on your consolidated post.

[convinced49]

hello.....i am needing some info on repairing the engine after it blew a head gasket. 1992 ford explorer xlt 4x4 6 cyl . I think its a 4.0, but not sure! Need schematics please if you can

[Aaron_C_43]

Just a quick not to whomever,, This link below is no longer valid. I got a 404 error. Page cannot be found,, yadda, yadda.

Originally Posted by Michiganbear

this site contains most of the 90's era service manual cd (from ford).

check em out, they are the real ford product, not a knockoff like chiltons or haynes..

http://www24.brinkster.com/sdhartney/linc/linc.htm

yes, I know the site is geared towards lincolns, I found it when I had my 91 continental. They do have the trucks in some of the early ones as well as cars, others have the trucks seperate.

[Aaron_C_43]

Originally Posted by convinced49

hello.....i am needing some info on repairing the engine after it blew a head gasket. 1992 ford explorer xlt 4x4 6 cyl . I think its a 4.0, but not sure! Need schematics please if you can

Yes its a 4.0,, remove exhaust manifolds,, Spray well with wd40 or PBBlaster a few days before starting to loosen them up, remove intakes,, actually a haynes manual from autozone or oreillys will tell you what you need.