Brandon@BTF-fab

**Turdle** · 10-22-2010, 10:36 AM

Feedback for Brandon here

*Ronin8002* · 12-11-2010, 03:20 PM

Positive experience...I ordered on monday and got them on saturday. Welds and cuts looked excellent. Two thumbs up for Brandon@BTF!

kab188 · 01-10-2011, 06:46 PM

Hey brandon This is Rick from New Jersey! Igot a break in the weather for a few dayts and completed the spacer install completely by myself! I did need a balljoint puller for the ball joints.Everything went smoothly.The 2.25 front and 1.75 rear spacers seem perfect. I see no problem with the upper control arm.I have already had my truck out in the Pine Barrens and fully flexed and tested the suspension and have no problems at all. I will eventually put in the Moog ball joints. Thanks for a great product and your support!

MGG · 01-11-2012, 11:46 PM

No feedback for over a year? I sent an order and payment through paypal last night. We'll see...

**Maniak** · 01-12-2012, 12:03 AM

I didn't even notice we had this thread...

I called them about cut/turning my 1st gen beams. We talked a bit, and then 3 months later I had the cash, spare beams and a way to get the beams there without shipping.

I got the beams to him and within 1 week he had them done and shipped to me. I came home from work and viola, they were waiting for me on the front porch..

No issues with BTF.. Their welds looked nice and clean and the cut/turned beams are working great.

This is the thread which talks about the cut/turned beams from them..
http://www.explorerforum.com/forums/...d.php?t=312831

~Mark

MGG · 01-12-2012, 10:05 AM

Quote:

Originally Posted by Maniak

I didn't even notice we had this thread...

I called them about cut/turning my 1st gen beams. We talked a bit, and then 3 months later I had the cash, spare beams and a way to get the beams there without shipping.

I got the beams to him and within 1 week he had them done and shipped to me. I came home from work and viola, they were waiting for me on the front porch..

No issues with BTF.. Their welds looked nice and clean and the cut/turned beams are working great.

This is the thread which talks about the cut/turned beams from them..
http://www.explorerforum.com/forums/...d.php?t=312831

~Mark

Seems like the thread is somewhat hidden. You can't find it unless you go through the HOW TO: BTF-Fabrication Spacer Lift Install thread and there is a link. I don't think it displays anywhere else that I can tell.

Its good to know about the positive experiences. I'm just a bit weary after reading about the road bully guy. I sent my payment to btf 2 nights ago and haven't heard back or got any kind of receipt to know if he even got the payment. I've text and emailed. I would have liked some acknowledgement of this.

**Maniak** · 01-12-2012, 10:21 AM

Quote:

Originally Posted by MGG

Seems like the thread is somewhat hidden. You can't find it unless you go through the HOW TO: BTF-Fabrication Spacer Lift Install thread and there is a link. I don't think it displays anywhere else that I can tell.

Its good to know about the positive experiences. I'm just a bit weary after reading about the road bully guy. I sent my payment to btf 2 nights ago and haven't heard back or got any kind of receipt to know if he even got the payment. I've text and emailed. I would have liked some acknowledgement of this.

Given Brandon a jingle on the phone. Its a small operation and from what I gather, the phone rings his cell phone which he can get to much easier than email etc.

~Mark

Jack_Wagon · 06-27-2012, 12:50 PM

Finally got my spacers installed. So far so good.

tapia_alex · 07-04-2012, 02:53 AM

how can i buy the spacers ? where do i pay BTF?

*Ronin8002* · 07-04-2012, 07:09 AM

Quote:

Originally Posted by tapia_alex

how can i buy the spacers ? where do i pay BTF?

Call him. His number is in one of the btf spacer threads...do a search. You'll pay via PayPal.

*Keeper0311* · 11-03-2012, 04:09 PM

I dealt with BTF a few weeks ago. Called them up talked for a bit and order a set of beefy UCA's . Placed the order and left a down payment at their shop, arms were ready two weeks later. Brandon and Travis are great guys and easy to work with. Highly recommend them.

10-22-2010, 10:36 AM	#1
Turdle Old and in the way Humboldt, Kansas 2000 Mounty Join Date: Jun 2003 Posts: 23,745 Vehicle Specs (Original Poster)	Brandon@BTF-fab Feedback for Brandon here __________________ Jon 2000 Mountaineer Turdle-gone Vitamin D Wagon Sold also

12-11-2010, 03:20 PM	#2
Ronin8002 Elite Explorer Virginia 2008 XLT Ironman Join Date: Mar 2003 Posts: 3,874 Vehicle Specs	Positive experience...I ordered on monday and got them on saturday. Welds and cuts looked excellent. Two thumbs up for Brandon@BTF! __________________ Mods: 265/70/17 Mickey Thompson Baja STZ on 17x8 Black Rock Viper 900B wheels, Bentley style grille, Raptor style LED grille lights, Pacer performance clearance lights, 30" 180W LED light bar behind grille, BTF upper control arms, Fox 2.0 5" travel emulsion coilover shocks in front/rear Truxx spacers, 1" body lift, front skidplate under radiator, recovery shackle mounts My Rig:http://www.explorerforum.com/forums/...47#post3004247

01-11-2012, 11:46 PM	#4
MGG Wannabe Elite Explorer The Mitten 2002 XLS, 4.0, 2WD Join Date: Mar 2006 Posts: 133 Vehicle Specs	No feedback for over a year? I sent an order and payment through paypal last night. We'll see... __________________ Current: 1.5 body lift, 2.0 front 1.5 rear BTF spacers, Strutteks, Soft 8's with 245/75/16 Goodyear Wrangler DuraTrac Wish list: Bull bar, custom bumpers, tow hooks, driving lights, roof rack, roof lights, 4th gen heated/lighted mirrors, 4th gen tail lights, custom skid plates, HID and LED lighting, 3rd row and leather addition

01-12-2012, 12:03 AM	#5
Maniak Moderator-Stock 91-94 Vail, Arizona 1992 XLT 4x4 Join Date: Feb 1999 Posts: 10,742 Vehicle Specs	positive feedback. I didn't even notice we had this thread... I called them about cut/turning my 1st gen beams. We talked a bit, and then 3 months later I had the cash, spare beams and a way to get the beams there without shipping. I got the beams to him and within 1 week he had them done and shipped to me. I came home from work and viola, they were waiting for me on the front porch.. No issues with BTF.. Their welds looked nice and clean and the cut/turned beams are working great. This is the thread which talks about the cut/turned beams from them.. http://www.explorerforum.com/forums/...d.php?t=312831 ~Mark __________________ Click HERE to see our Explorer Specs

11-03-2012, 04:09 PM	#11
Keeper0311 Dude, where's my VBIED? Riverside, CA 2000 XLT 4x4 Join Date: Apr 2010 Posts: 1,590 Vehicle Specs	I dealt with BTF a few weeks ago. Called them up talked for a bit and order a set of beefy UCA's . Placed the order and left a down payment at their shop, arms were ready two weeks later. Brandon and Travis are great guys and easy to work with. Highly recommend them. __________________ 2000 XLT 4x4 2000 Explorer Sport:Sold

01-10-2011, 06:46 PM	#3
kab188 Wannabe Elite Explorer new jersey 2003 xlt Join Date: Mar 2010 Posts: 3 Vehicle Specs	Hey brandon This is Rick from New Jersey! Igot a break in the weather for a few dayts and completed the spacer install completely by myself! I did need a balljoint puller for the ball joints.Everything went smoothly.The 2.25 front and 1.75 rear spacers seem perfect. I see no problem with the upper control arm.I have already had my truck out in the Pine Barrens and fully flexed and tested the suspension and have no problems at all. I will eventually put in the Moog ball joints. Thanks for a great product and your support!

06-27-2012, 12:50 PM	#8
Jack_Wagon Wannabe Elite Explorer Glen Burnie, MD 07 JK, 97 F250, Join Date: Dec 2010 Posts: 17 Vehicle Specs	Finally got my spacers installed. So far so good.

07-04-2012, 02:53 AM	#9
tapia_alex Wannabe Elite Explorer 2004 Mercury Mountaineer Join Date: Jun 2012 Posts: 2 Vehicle Specs	how can i buy the spacers ? where do i pay BTF?