Parting out 95-2001 Explorers

*ped5stang* · 06-26-2012, 08:28 AM

Quote:

Originally Posted by dannytech_lt

Do u have a working Eddie Bauer mach unit radio head unit?

If you can send me a picture, front and back, I can see if I have one available. ped5stang@aol.com.

*ped5stang* · 06-26-2012, 08:29 AM

Quote:

Originally Posted by djmunster

im looking for the rear blower motor fan ,if so how much shipped to 11357 thanks

I do not have a rear blower motor.

*YoungMounty* · 06-26-2012, 10:10 PM

Power antenna to 35904?

*ped5stang* · 06-27-2012, 07:40 AM

Quote:

Originally Posted by YoungMounty

Power antenna to 35904?

I do not have a power antenna.

Sooonerfan51 · 07-01-2012, 12:38 AM

Do you have an awd transfer case with the 4 bolt front flange? I two is it in working order?
Thank you

*ped5stang* · 07-01-2012, 07:37 AM

Quote:

Originally Posted by Sooonerfan51

Do you have an awd transfer case with the 4 bolt front flange? I two is it in working order?
Thank you

Yes, I do have an AWD transfer case. $300. Works fine.

*YoungMounty* · 07-01-2012, 11:53 AM

Regular antenna?

*ped5stang* · 07-01-2012, 07:23 PM

Quote:

Originally Posted by YoungMounty

Regular antenna?

Sorry, I have sold all the antennas that I have.

Sooonerfan51 · 07-01-2012, 09:53 PM

Quote:

Originally Posted by ped5stang

Yes, I do have an AWD transfer case. $300. Works fine.

Any idea on the mileage?

*ped5stang* · 07-02-2012, 08:33 AM

Quote:

Originally Posted by Sooonerfan51

Any idea on the mileage?

The Explorer had 131k miles.

explorer0110 · 07-02-2012, 10:27 AM

im looking to replace my 2001 sport leaf packs with ones from a 4dr do you have any that haave not yet suffered the ganster effect
price and shipping to r6m1g4 manitoba canada

*ped5stang* · 07-02-2012, 12:04 PM

Quote:

Originally Posted by explorer0110

im looking to replace my 2001 sport leaf packs with ones from a 4dr do you have any that haave not yet suffered the ganster effect
price and shipping to r6m1g4 manitoba canada

I am currently sold out of the 4 door leaf springs.

Shapechanger · 07-06-2012, 10:20 PM

Do you have the engine plates that look like these, they are off of a 5.0

*ped5stang* · 07-07-2012, 07:24 AM

[QUOTE=Shapechanger;2996400]Do you have the engine plates that look like these, they are off of a 5.0

I do have a set of the flat brackets for $45, plus shipping.

*CDW6212R* · 07-07-2012, 09:25 AM

I have two projects to find parts for;

Do you have 98-01 Limited memory seats, that I can buy the seat motors and module with harness from?

I also need some 98 and 99/2000 Mustang wiring, for an OBDII conversion for my Lincoln. Can I get an engine and computer harness for a Mustang 1998 4.6/Auto? Do you have a dash and under hood harness for a 1999/2000 Mustang 4.6/Auto/ABS? I also need the ABS and GEM modules from that 99/00 car. I'm hoping it may be a better deal to get them from one source than getting each separately. Thanks,

*ped5stang* · 07-09-2012, 09:58 AM

Quote:

Originally Posted by CDW6212R

I have two projects to find parts for;

Do you have 98-01 Limited memory seats, that I can buy the seat motors and module with harness from?

I also need some 98 and 99/2000 Mustang wiring, for an OBDII conversion for my Lincoln. Can I get an engine and computer harness for a Mustang 1998 4.6/Auto? Do you have a dash and under hood harness for a 1999/2000 Mustang 4.6/Auto/ABS? I also need the ABS and GEM modules from that 99/00 car. I'm hoping it may be a better deal to get them from one source than getting each separately. Thanks,

I do not have any memory seats. I have the 98 Mustang 4.6 engine and computer harness available for $200. I do not have the 99/00 Mustang GT 4.6 auto wiring harness.

*CDW6212R* · 07-09-2012, 02:14 PM

Okay that's good, a first step. How are those two wiring harnesses, are they completely intact with nothing cut or pulled apart? I'm doing a big conversion, so the wiring needs to be unhurt to begin with so I don't have to troubleshoot that later. Thanks,

*briwayjones* · 07-09-2012, 09:50 PM

Do you have a rear mounting bracket for a full length 2nd gen. Explorer center console? It's the one that sits under the rear of the console on the floor.

Ksmith5rs · 07-10-2012, 11:26 AM

Do you have a OEM subwoofer? Also looking for the hood rubber bumpers attached to the fenders.
Thanks

*ped5stang* · 07-10-2012, 12:49 PM

Quote:

Originally Posted by CDW6212R

Okay that's good, a first step. How are those two wiring harnesses, are they completely intact with nothing cut or pulled apart? I'm doing a big conversion, so the wiring needs to be unhurt to begin with so I don't have to troubleshoot that later. Thanks,

The wiring is still in the car and on the engine.

06-26-2012, 10:10 PM	#4963
YoungMounty Elite Explorer Alabama '97 Mounty 5.0 V8 AWD Join Date: Apr 2010 Posts: 315 Vehicle Specs	Power antenna to 35904? __________________ 1997 Mercury Mountaineer, 5.0L V8 AWD ELITE REGISTRY SAS Build Thread

07-01-2012, 11:53 AM	#4967
YoungMounty Elite Explorer Alabama '97 Mounty 5.0 V8 AWD Join Date: Apr 2010 Posts: 315 Vehicle Specs	Regular antenna? __________________ 1997 Mercury Mountaineer, 5.0L V8 AWD ELITE REGISTRY SAS Build Thread

07-07-2012, 09:25 AM	#4975
CDW6212R Elite Explorer Knoxville, TN 98 Mountaineer A4WD Join Date: Jun 2004 Posts: 12,949 Vehicle Specs	I have two projects to find parts for; Do you have 98-01 Limited memory seats, that I can buy the seat motors and module with harness from? I also need some 98 and 99/2000 Mustang wiring, for an OBDII conversion for my Lincoln. Can I get an engine and computer harness for a Mustang 1998 4.6/Auto? Do you have a dash and under hood harness for a 1999/2000 Mustang 4.6/Auto/ABS? I also need the ABS and GEM modules from that 99/00 car. I'm hoping it may be a better deal to get them from one source than getting each separately. Thanks, __________________ Don 91 Lincoln LSC/SE, 99/93 Explorer Limited 4WD, 98 AWD Mounty with 255/55/18's, big sway bars, and 12.75" x 1.25" rotors. Soon a BW4406, built trans, stereo and interior. The best thing that could help us all, is the Fair Tax Plan. Be American, Buy American (Manufacturer)

07-09-2012, 02:14 PM	#4977
CDW6212R Elite Explorer Knoxville, TN 98 Mountaineer A4WD Join Date: Jun 2004 Posts: 12,949 Vehicle Specs	Okay that's good, a first step. How are those two wiring harnesses, are they completely intact with nothing cut or pulled apart? I'm doing a big conversion, so the wiring needs to be unhurt to begin with so I don't have to troubleshoot that later. Thanks, __________________ Don 91 Lincoln LSC/SE, 99/93 Explorer Limited 4WD, 98 AWD Mounty with 255/55/18's, big sway bars, and 12.75" x 1.25" rotors. Soon a BW4406, built trans, stereo and interior. The best thing that could help us all, is the Fair Tax Plan. Be American, Buy American (Manufacturer)

07-09-2012, 09:50 PM	#4978
briwayjones Elite Explorer Sykesville, MD '00 XLS, '03 Sport Join Date: Dec 2003 Posts: 4,328 Vehicle Specs	Do you have a rear mounting bracket for a full length 2nd gen. Explorer center console? It's the one that sits under the rear of the console on the floor. __________________ 2000 XLS, 4DR, 4x4, OHV, Manual ; 2003 Sport, 2DR, 2WD, SOHC, Manual Mobil 1 & Amsoil Synthetic Fluids, 2WD switch Brown wire mod, KKM air intake, overhead console, lighted sunvisors, custom 2nd HU install, '03 Ranger Fog lights, Hurst short-shifter, 75MM MAF, BBK 66MM Throttle Body My 2000 Explorer

07-01-2012, 12:38 AM	#4965
Sooonerfan51 Wannabe Elite Explorer Norman, OK 1997 Mountaineer Join Date: Dec 2011 Posts: 11 Vehicle Specs	Do you have an awd transfer case with the 4 bolt front flange? I two is it in working order? Thank you

07-02-2012, 10:27 AM	#4971
explorer0110 Wannabe Elite Explorer morden manitoba 2001 ford explorer sport Join Date: Jun 2012 Posts: 6 Vehicle Specs	im looking to replace my 2001 sport leaf packs with ones from a 4dr do you have any that haave not yet suffered the ganster effect price and shipping to r6m1g4 manitoba canada

07-06-2012, 10:20 PM	#4973
Shapechanger Wannabe Elite Explorer Omaha, NE 1985, 1987 Bronco II Join Date: Jul 2012 Posts: 4 Vehicle Specs	Do you have the engine plates that look like these, they are off of a 5.0

07-07-2012, 07:24 AM	#4974
ped5stang EF Vendor Lawrence, Kansas Join Date: Dec 2002 Posts: 3,671 Vehicle Specs (Original Poster)	[QUOTE=Shapechanger;2996400]Do you have the engine plates that look like these, they are off of a 5.0 I do have a set of the flat brackets for $45, plus shipping.

07-10-2012, 11:26 AM	#4979
Ksmith5rs Wannabe Elite Explorer 1999 Explorer Join Date: Jun 2012 Posts: 1 Vehicle Specs	Do you have a OEM subwoofer? Also looking for the hood rubber bumpers attached to the fenders. Thanks