- Joined
- July 14, 1999
- Messages
- 10,539
- Reaction score
- 749
- City, State
- Omao, Kauai
- Year, Model & Trim Level
- '93 Ranger XLT 4X4
I need to replace a front brake hose that has a leak. I have aftermarket braided stainless hoses on there for years and years, and I don't remember what the stock hose end looked like.
My question is, is there a reason my passenger side ends at the caliper with a banjo fitting, and the driverside ends with a fat rectangular block?
I don't see why they are different, it looks like either type would work on either caliper.
Are they different on stock hoses?
This is on a TTB D35 axle, so it all should be the same as a 1st gen Ex, if that helps you.
My question is, is there a reason my passenger side ends at the caliper with a banjo fitting, and the driverside ends with a fat rectangular block?
I don't see why they are different, it looks like either type would work on either caliper.
Are they different on stock hoses?
This is on a TTB D35 axle, so it all should be the same as a 1st gen Ex, if that helps you.